Hypertherm ProNest vs. Messer Global Control

For general topics and questions that do not fit into any of the other categories or forums.
Post Reply
grimes.jason.w
1/2 Star Member
1/2 Star Member
Posts: 1
Joined: Tue Jul 31, 2018 5:04 pm

Hypertherm ProNest vs. Messer Global Control

Post by grimes.jason.w »

Hi all and thanks for what you do on the site. I have a question regarding nesting software and controllers. Currently our shop uses ProNest from hypertherm for our nesting and controller needs, we are upgrading our equipment in the very near future to a messer machine which has it's own control, the messer global control.

Can anyone here speak to the differences in the 2 and what will it take on our end as a company to switch all of our files, 10000+ from ProNest over to Global Control? We work from .dxf files and send the cut files to the machines as .cnc
jimcolt
5 Star Elite Contributing Member
5 Star Elite Contributing Member
Posts: 3087
Joined: Mon Jul 20, 2009 11:18 pm
Location: North Carolina

Re: Hypertherm ProNest vs. Messer Global Control

Post by jimcolt »

The Global Control is from Messer Cutting Systems Inc., I think the best answer to your question will come from Messer. You should be able to continue using Pro-Nest with the Messer machine, and that is what I strongly recommend. Jim Colt Hypertherm
Post Reply

Return to “CNC Plasma Cutters General Forum”