It is currently Mon Sep 24, 2018 7:46 am

 

fab-cut systems

Have a question and don't see your manufacturer? Post here and if we get enough action on that manufacturer we will add a forum
Ax2ron
Posts: 2
Joined: Fri Jul 27, 2018 11:50 am

fab-cut systems

Postby Ax2ron » Fri Jul 27, 2018 12:01 pm

I am completely new to this forum and to CNC. I have been looing into getting a Cnc plasma for my business and have been in contact with Rene from fab-cut systems as well as many others (Shopsabre, Fastcut, Koike, Tru-Cut....) So far like what I see from Rene and Fab- cut. I am looking to get a 6x12 water table with a Maxpro 200 and oxy fuel set up to burn 2" + material. if anyone has experience with fab-cut systems positive or not I would greatly appreciate any input.

Thanks,

thebouncingwelder
Posts: 66
Joined: Mon Jul 13, 2015 5:07 pm

Re: fab-cut systems

Postby thebouncingwelder » Fri Jul 27, 2018 8:07 pm

Hello. I had a kickass machine and the computer went on it. The company that built the table has long since gone under so I found Rene's ad for an upgrade for my machine. I have to admit it took a while to get to me but as soon as it did they were very helpful getting it up and running. They even helped me out when I needed a new lifter for my torch. I would highly recommend doing business with Rene at fab-cut

Ax2ron
Posts: 2
Joined: Fri Jul 27, 2018 11:50 am

Re: fab-cut systems

Postby Ax2ron » Tue Sep 11, 2018 11:41 pm

Thanks for the info TBW. I ordered a heavy duty 6x12 water table with a Hypertherm Powermax 125, laser pointer, HD scriber and an oxy fuel torch from Rene and have been told the machine will be ready for shipping September 19-20. So far I am quite pleased with Rene and the Fab-Cut team and really like the Flashcut Software the use (They sent a demo version for me to try). I will report back after I get it and test it out for those who may be interested.

Desertdog
Posts: 12
Joined: Sat Sep 26, 2015 9:50 am

Re: fab-cut systems

Postby Desertdog » Wed Sep 12, 2018 1:14 pm

You will love Flashcut! The only reason most table builders don't offer it is cost. Why wouldn't you want to offer your customer a reliable, easy to use system that needs little to no support. On the rare occasions you do they can VPN into your system with team viewer and fix it in minutes.


Return to “Various Manufacturers”

Who is online

Users browsing this forum: No registered users and 4 guests

Easyscriber engrave attachment for Hypertherm torch's