Im new to all this, How do I down load files to cut ? When I down load file it wont open? Im running Inscape, Sheetcam and mach 3 on my wright 4x4 table.
Thank you
Chip
Newbee downloading files?
- WyoGreen
- 4 Star Member
- Posts: 897
- Joined: Tue Mar 04, 2014 8:36 pm
- Location: Cheyenne, Wyoming
Re: Newbee downloading files?
It sounds like you are getting the .dxf file to download. (You can't open the .pcm files you find on here unless you have a plasmacam). In Sheetcam you "import" the .dxf file. Not entirely sure about Inkscape, but it's probably an import too. (That's instead of "open file"
Steve
Steve
Precision Plasma gantry
CommandCNC Linux controller w/Feather Touch & PN200 hand controller
HT-45 plasma cutter
Plate Marker
Router
Laser
CommandCNC Linux controller w/Feather Touch & PN200 hand controller
HT-45 plasma cutter
Plate Marker
Router
Laser
-
- 1.5 Star Member
- Posts: 31
- Joined: Tue Jan 03, 2017 7:05 am
Re: Newbee downloading files?
HOW DO i GET IT TO SHEETCAM ?
- acourtjester
- 6 Star Elite Contributing Member
- Posts: 7792
- Joined: Sat Jun 02, 2012 6:04 pm
- Location: Pensacola, Fla
Re: Newbee downloading files?
SheetCam operates like most windows programs you click on "Import Drawing" and it opens up a folder on the disc. You may need to navigate to where you have stored the file, you also need to ID the type of file (DXF or SVG) it only displays one type at a time in that location. Click on the file you want to import, now for SVG it will give you a ration 1:25 you need to change it to 1:1 to match the original size. You can do a different ratio if you want to increase its size. Or you can click on custom and select what you want. SheetCam also give you the option of where to display it on the screen, lower left may be the most likely, just click to position the dot for location.
DIY 4X4 Plasma/Router Table
Hypertherm PM65 Machine Torch
Drag Knife and Scribe
Miller Mig welder
13" metal lathe
Small Mill
Everlast PowerTig 255 EXT
Hypertherm PM65 Machine Torch
Drag Knife and Scribe
Miller Mig welder
13" metal lathe
Small Mill
Everlast PowerTig 255 EXT
-
- 2.5 Star Member
- Posts: 171
- Joined: Fri Nov 18, 2016 5:13 pm
Re: Newbee downloading files?
Here are some good videos on working in Sheetcam from Arclight CNC's website: https://arclightcnc.com/sheetcam-tutorials/#
Tim Eggleston
Banks High School
Banks, OR
Arc Pro 4800
PowerMax 45XP
Mach 3, SheetCam
Inkscape, Rhino 3D
Banks High School
Banks, OR
Arc Pro 4800
PowerMax 45XP
Mach 3, SheetCam
Inkscape, Rhino 3D