Having some issues with opening .dxf files in inkscape - after I get all the segments joined up I still have a bazillion nodes. The cntr L command makes my US map look like it was made from wax and put to close to a candle.
I don't mind paying if needed - just trying to get a workable .svg file of the US flag/map and the tattered flag as well. The .dxf's posted cut fine....pretty sure it's inkscape that is having the issue.
Any help is appreciated!
-Theo Aftonomos
Seaside Metal Design
Need to enlist some file help
-
- 2.5 Star Member
- Posts: 155
- Joined: Sat May 03, 2014 3:24 pm
- rdj357
- 4 Star Elite Contributing Member
- Posts: 1165
- Joined: Sun Mar 11, 2012 4:40 pm
- Location: Tahlequah, OK
- Contact:
Re: Need to enlist some file help
email me what you have and I'll fix it up and send it back. robert@490creations.com
Robert Johnson
----- PlasmaCam 5x10 Table -----
FourNinety Creations & Learn PC, LLC
Plasmacam Goodies! Snap'NCut Mount, AXXON Cards/Cables, Maintenance Items
Learn Plasmacam Workshops
Learn Plasmacam on Facebook
Learn Plasmacam on YouTube
----- PlasmaCam 5x10 Table -----
FourNinety Creations & Learn PC, LLC
Plasmacam Goodies! Snap'NCut Mount, AXXON Cards/Cables, Maintenance Items
Learn Plasmacam Workshops
Learn Plasmacam on Facebook
Learn Plasmacam on YouTube