Hey guys, I have a Swifty 2x2 and love the product and phenominal support buuuut, I have outgrown it. The SwiftCut Pro 44 is my top choice and one sharp piece of equipment and the price tag is a bit out of reach (22-25k).
How does every body feel about StarLab? They look good to me but, I need reassurance before I go drop coin on a 4x4 from them. Any other recommendations are very welcome as well.
Thanks!
Opinions Needed
-
djreiswig
- 4.5 Star Elite Contributing Member
- Posts: 1937
- Joined: Thu Nov 19, 2015 10:02 pm
- Location: SE Nebraska
Re: Opinions Needed
I have a Starlab and I would highly recommend them. Very solid table and Matt is a stand up guy. If you have the space, go 4x8. Not a lot more and then you can do full sheets.
2014 Bulltear (StarLab) 4x8
C&CNC EtherCut
Mach3, SheetCam, Draftsight
Hypertherm PM65
Oxy/Acetylene Flame Torch
Pneumatic Plate Marker, Ohmic, 10 inch Rotary Chuck (in progress)
C&CNC EtherCut
Mach3, SheetCam, Draftsight
Hypertherm PM65
Oxy/Acetylene Flame Torch
Pneumatic Plate Marker, Ohmic, 10 inch Rotary Chuck (in progress)
-
dogblazer 9598
- 1/2 Star Member
- Posts: 5
- Joined: Sun Mar 18, 2018 6:13 pm
Re: Opinions Needed
we have a 4x8 Starlab and love it .If I had any issues matt always helped us through it and it was always our operator issues not the machine .It is a beautiful piece of equipment.
-
Ironken
- 3 Star Member
- Posts: 322
- Joined: Thu Nov 30, 2017 7:29 pm
Re: Opinions Needed
Thanks guys! I appreciate good words from actual owners. That eases the mind.
A 4x8 would be ideal but, space is tight here. I have a small fleet of blue welding equipment and need a table sized to fit in the space left. Yes, I have an illness.....I see metal working equipment and want to give it a new home......all of it.
A 4x8 would be ideal but, space is tight here. I have a small fleet of blue welding equipment and need a table sized to fit in the space left. Yes, I have an illness.....I see metal working equipment and want to give it a new home......all of it.
-
Desertdog
- 1.5 Star Member
- Posts: 25
- Joined: Sat Sep 26, 2015 9:50 am
- Location: Arizona
Re: Opinions Needed
Pass on Matt and Starlab. PM sent.
Westcott Retro 5x10
Design2Cut software, CAD, CAM, CUT, all in one program.
Hypertherm 45XP
Champion 2 stage compressor, 7.5 HP motor, 15 HP pump (QUIET!),
80 gallon tank, auto tank drain, mag starter, after cooler.
25.8 CFM@175
Design2Cut software, CAD, CAM, CUT, all in one program.
Hypertherm 45XP
Champion 2 stage compressor, 7.5 HP motor, 15 HP pump (QUIET!),
80 gallon tank, auto tank drain, mag starter, after cooler.
25.8 CFM@175
