Greencut cutting fluid

For general topics and questions that do not fit into any of the other categories or forums.
Post Reply
User avatar
little blue choo
4 Star Member
4 Star Member
Posts: 1460
Joined: Mon Mar 02, 2015 10:38 pm
Location: Cherryville NC
Contact:

Greencut cutting fluid

Post by little blue choo »

Who is using Greencut and where are you purchasing it. I am located near Charlotte NC and would like to find a distributor near by to save on shipping.

Rick
Rick
Arclight 9600 4x8 table
Hypertherm PM65
Acc. Plate Marker, 4 inch Pipe Cutter, Wood Router package
Quincy Q54 compressor 2 stage, 5hp, 60 gal
Refrigerated air dryer & 4 stage filtration system
Software Mach 3, Sheetcam, Solid Edge 2D, Inkscape
User avatar
little blue choo
4 Star Member
4 Star Member
Posts: 1460
Joined: Mon Mar 02, 2015 10:38 pm
Location: Cherryville NC
Contact:

Re: Greencut cutting fluid

Post by little blue choo »

Just got shipping quote from Canada at $62. I think not.

Rick
Rick
Arclight 9600 4x8 table
Hypertherm PM65
Acc. Plate Marker, 4 inch Pipe Cutter, Wood Router package
Quincy Q54 compressor 2 stage, 5hp, 60 gal
Refrigerated air dryer & 4 stage filtration system
Software Mach 3, Sheetcam, Solid Edge 2D, Inkscape
User avatar
SegoMan DeSigns
3.5 Star Elite Contributing Member
3.5 Star Elite Contributing Member
Posts: 822
Joined: Sat Jan 06, 2018 4:45 pm

Re: Greencut cutting fluid

Post by SegoMan DeSigns »

Go do your laundry....

(pt).8 oz of Laundry Soda (sodium carbonate) / gal of water will yield a PH of 11. I can treat 350 gal for a $20 bill. I use to use Dynaflux PWT 360 Water Table Treatment but it is pricey too. You want a minimum ph of 10 (check fleebay for PH test strips they are really cheap too). It is also called Soda Ash spa and pool companies sell that . The great Wall of China Mart sells a 55oz box for $4.00
dogblazer 9598
1/2 Star Member
1/2 Star Member
Posts: 5
Joined: Sun Mar 18, 2018 6:13 pm

Re: Greencut cutting fluid

Post by dogblazer 9598 »

Rick, we get ours from Jones racing equipment in Pennsylvania.

doug
JohnnyC
1.5 Star Member
1.5 Star Member
Posts: 46
Joined: Mon Feb 12, 2018 9:13 am

Re: Greencut cutting fluid

Post by JohnnyC »

To change subject a bit. How often do yall change your water in table?
User avatar
Ironken
3 Star Member
3 Star Member
Posts: 322
Joined: Thu Nov 30, 2017 7:29 pm

Re: Greencut cutting fluid

Post by Ironken »

I buy my Greencut direct from Canada (the mfg). I wish I could buy local but, Airgas' price with shipping is higher than direct with shipping. I really like the stuff.
User avatar
little blue choo
4 Star Member
4 Star Member
Posts: 1460
Joined: Mon Mar 02, 2015 10:38 pm
Location: Cherryville NC
Contact:

Re: Greencut cutting fluid

Post by little blue choo »

dogblazer 9598 wrote:Rick, we get ours from Jones racing equipment in Pennsylvania.

doug
Thanks Doug. I'll check them out.

Rick
Rick
Arclight 9600 4x8 table
Hypertherm PM65
Acc. Plate Marker, 4 inch Pipe Cutter, Wood Router package
Quincy Q54 compressor 2 stage, 5hp, 60 gal
Refrigerated air dryer & 4 stage filtration system
Software Mach 3, Sheetcam, Solid Edge 2D, Inkscape
User avatar
little blue choo
4 Star Member
4 Star Member
Posts: 1460
Joined: Mon Mar 02, 2015 10:38 pm
Location: Cherryville NC
Contact:

Re: Greencut cutting fluid

Post by little blue choo »

SegoMan DeSigns wrote:Go do your laundry....

(pt).8 oz of Laundry Soda (sodium carbonate) / gal of water will yield a PH of 11. I can treat 350 gal for a $20 bill. I use to use Dynaflux PWT 360 Water Table Treatment but it is pricey too. You want a minimum ph of 10 (check fleebay for PH test strips they are really cheap too). It is also called Soda Ash spa and pool companies sell that . The great Wall of China Mart sells a 55oz box for $4.00
Used that years ago and didn't like the mess it makes if you let the table sit for a day or two. I'll stick with the Greencut.

Rick
Rick
Arclight 9600 4x8 table
Hypertherm PM65
Acc. Plate Marker, 4 inch Pipe Cutter, Wood Router package
Quincy Q54 compressor 2 stage, 5hp, 60 gal
Refrigerated air dryer & 4 stage filtration system
Software Mach 3, Sheetcam, Solid Edge 2D, Inkscape
Post Reply

Return to “CNC Plasma Cutters General Forum”