Engine fire pit dxf
-
simpsonxtreme
- 1/2 Star Member
- Posts: 4
- Joined: Tue Dec 06, 2016 7:16 pm
Engine fire pit dxf
Does anyone have a dxf of this fire pit? Thank you.
You currently do not have access to download this file.
To gain download access for DXF, SVG & other files Click Here
-
Paint Chip
- 2.5 Star Member
- Posts: 108
- Joined: Tue Oct 30, 2012 7:43 pm
Re: Engine fire pit dxf
Probably only the guy who designed it and sells them. It's is a very complicated assembly and I wouldn't blame anyone who created it for wanting to keep it to himself or only share it privately for in-kind exchanges.
PPLLC 4X8 table w 620 ox steppers on 5 axes
Bladerunner CandCNC w/DTHC II
Hypertherm PM85
Bladerunner CandCNC w/DTHC II
Hypertherm PM85
-
MemFor
- 1.5 Star Member
- Posts: 46
- Joined: Mon Nov 16, 2015 9:08 pm
- Location: Southern Illinois
- Contact:
Re: Engine fire pit dxf
You are asking for a lot here, they run $800 un-assembled. This picture might at least get you thinking of how to make your own.
You currently do not have access to download this file.
To gain download access for DXF, SVG & other files Click Here
-
plasmanick
- 1/2 Star Member
- Posts: 1
- Joined: Thu Aug 04, 2016 4:32 pm
Re: Engine fire pit dxf
Those are our firepits. I can't give the file away but I'd consider selling it if there's interest. Thanks
https://m.facebook.com/CliffordsMetalWorks
https://m.facebook.com/CliffordsMetalWorks
-
bubbagsj
- 1 Star Member
- Posts: 16
- Joined: Sat Jan 13, 2018 10:21 am
Re: Engine fire pit dxf
Very nice design and product!
-
Patrick Waite
- 2.5 Star Member
- Posts: 239
- Joined: Sun May 16, 2010 3:28 am
-
ShadowPray69
- 1 Star Member
- Posts: 10
- Joined: Mon Jan 22, 2018 5:05 pm
Re: Engine fire pit dxf
Wondering what price is for the file
-
nevetskrats
- 1.5 Star Member
- Posts: 31
- Joined: Mon Feb 22, 2016 1:56 pm
Re: Engine fire pit dxf
I would be interested in purchasing your file also
-
little blue choo
- 4 Star Member
- Posts: 1460
- Joined: Mon Mar 02, 2015 10:38 pm
- Location: Cherryville NC
- Contact:
Re: Engine fire pit dxf
I don't think they sell the file for the flat head fire pit or at least they didn't use to. They will sell you a pit for $849 or a weld together kit for $649. If you would like to contact them their number is (402) 981-4972. Good luck.
Rick
Rick
Rick
Arclight 9600 4x8 table
Hypertherm PM65
Acc. Plate Marker, 4 inch Pipe Cutter, Wood Router package
Quincy Q54 compressor 2 stage, 5hp, 60 gal
Refrigerated air dryer & 4 stage filtration system
Software Mach 3, Sheetcam, Solid Edge 2D, Inkscape
Arclight 9600 4x8 table
Hypertherm PM65
Acc. Plate Marker, 4 inch Pipe Cutter, Wood Router package
Quincy Q54 compressor 2 stage, 5hp, 60 gal
Refrigerated air dryer & 4 stage filtration system
Software Mach 3, Sheetcam, Solid Edge 2D, Inkscape
-
ggeh
- 3 Star Elite Contributing Member
- Posts: 319
- Joined: Thu Mar 31, 2016 2:51 pm
Re: Engine fire pit dxf
plasmanick wrote:Those are our firepits. I can't give the file away but I'd consider selling it if there's interest. Thanks
https://m.facebook.com/CliffordsMetalWorks
I would be interested in purchasing your file also.
Thanks Gary
-
ShadowPray69
- 1 Star Member
- Posts: 10
- Joined: Mon Jan 22, 2018 5:05 pm
Re: Engine fire pit dxf
Was anyone able to obtain the file?
-
AussieQ
- 1/2 Star Member
- Posts: 1
- Joined: Sat Jan 25, 2020 2:48 pm
Re: Engine fire pit dxf
I am a bit late but did anyone want to share/sell this?
