SIZING PROBLEM
-
- 1/2 Star Member
- Posts: 2
- Joined: Wed Feb 14, 2018 4:56 pm
SIZING PROBLEM
First off I'm new at this just learning my way. I am having a problem when transferring work from one program to another. I'm designing in torchmate cad lite 9. but when I transfer it to torchmate 4 to cut it the sizing is not the same. It doubles the height and divides the width in half. Any help would be greatly appreciated.
- larrycameron44
- 3.5 Star Member
- Posts: 579
- Joined: Sun Oct 31, 2010 4:12 pm
- Location: Auckland New Zealand
Re: SIZING PROBLEM
It’s a easy fix from memory, email Torchmate and they will help or join Fabrication Forum and pose question there.
https://www.fabricationforum.com/
Larry Cameron
RusticMetalArt
https://www.fabricationforum.com/
Larry Cameron
RusticMetalArt
-
- 1/2 Star Member
- Posts: 2
- Joined: Wed Feb 14, 2018 4:56 pm
Re: SIZING PROBLEM
OK THANKS. larrycameron44