Steel supplier in northern california?

For general topics and questions that do not fit into any of the other categories or forums.
Post Reply
Rough-n-Ready
1/2 Star Member
1/2 Star Member
Posts: 6
Joined: Mon Oct 16, 2017 2:36 pm

Steel supplier in northern california?

Post by Rough-n-Ready »

Can anyone recommend a steel supplier in the sacramento area? I'm actually in Grass Valley, but I figure i'll probably have to go to sacramento to find a good one.

Thanks!
DaltonMurphy
1 Star Member
1 Star Member
Posts: 22
Joined: Wed Feb 14, 2018 3:31 pm

Re: Steel supplier in northern california?

Post by DaltonMurphy »

Valley Iron, Samuel, Reliance. Im in sacramento, just ordered an 11ga HR sheet for $100 from valley iron last night
Rough-n-Ready
1/2 Star Member
1/2 Star Member
Posts: 6
Joined: Mon Oct 16, 2017 2:36 pm

Re: Steel supplier in northern california?

Post by Rough-n-Ready »

I ended up going to Gerlinger in Woodland (quite a drive) but I got 16ga CR at $53 a sheet, 12ga at $89 a sheet and 1/4" for $197. All 4x8 CR.
About 64 cents a pound.
I'll have to get quotes from those places too. Thanks!
Last edited by Rough-n-Ready on Fri Feb 16, 2018 1:02 pm, edited 1 time in total.
DaltonMurphy
1 Star Member
1 Star Member
Posts: 22
Joined: Wed Feb 14, 2018 3:31 pm

Re: Steel supplier in northern california?

Post by DaltonMurphy »

Yeah all the other places will deliver as well.
DaltonMurphy
1 Star Member
1 Star Member
Posts: 22
Joined: Wed Feb 14, 2018 3:31 pm

Re: Steel supplier in northern california?

Post by DaltonMurphy »

Do you have a shop or do you just do side plasma work???
Rough-n-Ready
1/2 Star Member
1/2 Star Member
Posts: 6
Joined: Mon Oct 16, 2017 2:36 pm

Re: Steel supplier in northern california?

Post by Rough-n-Ready »

Just in the side. Gerlinger delivers up here but wouldn’t deliver to my house because they wouldn’t be able to turn their truck around.
2015cmax
2 Star Elite Contributing Member
2 Star Elite Contributing Member
Posts: 64
Joined: Fri Apr 15, 2016 6:31 pm

Re: Steel supplier in northern california?

Post by 2015cmax »

Thought I would just put this out for comparison. Just bought a few sheets in the Los Angeles area from Industrial Metal Supply, Delivered
1/4" 4x8 HR. $224.32

16ga 4x8 CR. $56.80
User avatar
see&see
2.5 Star Elite Contributing Member
2.5 Star Elite Contributing Member
Posts: 218
Joined: Tue Jun 24, 2014 12:04 pm
Location: Minden, Nevada
Contact:

Re: Steel supplier in northern california?

Post by see&see »

Farwest Steel Stockton CA They ship most places free and here in Nevada coming from Stockton they cut PDM's Nevada prices almost in half.
You marry into the PlasmaCam family and must accept the fact your software and hardware are proprietary. It's a for better or for worse engagement with overwhelming security. PlasmaCam controls the computer, table, hardware to their advantage IMO. :x
netdude
1/2 Star Member
1/2 Star Member
Posts: 1
Joined: Tue Apr 04, 2017 1:09 pm

Re: Steel supplier in northern california?

Post by netdude »

Del Paso Pipe & Steel
Address: 5519 Raley Blvd., Sacramento, CA 95838
Email: sales@delpasopipeandsteel.com
Phone: (916) 992-6500

Northern Sac area off I-80
Post Reply

Return to “CNC Plasma Cutters General Forum”