New plasma table

For general topics and questions that do not fit into any of the other categories or forums.
Post Reply
Akcrawler
1/2 Star Member
1/2 Star Member
Posts: 2
Joined: Sat Feb 03, 2018 6:56 am

New plasma table

Post by Akcrawler »

Looking to build my own plasma table. I already have a thermal dynamics cut master 52. Can build my own table since I Live in AK and shipping one up here would be expensive. So basically I need the gantery and electronics. Im very green to this and any info or links would be appreciated.
User avatar
Larry83301
5 Star Elite Contributing Member
5 Star Elite Contributing Member
Posts: 2645
Joined: Tue Oct 27, 2009 6:36 pm
Location: Twin Falls, Idaho

Re: New plasma table

Post by Larry83301 »

Akcrawler wrote:Looking to build my own plasma table. I already have a thermal dynamics cut master 52. Can build my own table since I Live in AK and shipping one up here would be expensive. So basically I need the gantery and electronics. Im very green to this and any info or links would be appreciated.
Check out this part of the spider lots of info and pics could be of some help, OK! :D :D :D :D

http://www.plasmaspider.com/viewforum.php?f=103



Larry
User avatar
acourtjester
6 Star Elite Contributing Member
6 Star Elite Contributing Member
Posts: 7770
Joined: Sat Jun 02, 2012 6:04 pm
Location: Pensacola, Fla

Re: New plasma table

Post by acourtjester »

PM sent
DIY 4X4 Plasma/Router Table
Hypertherm PM65 Machine Torch
Drag Knife and Scribe
Miller Mig welder
13" metal lathe
Small Mill
Everlast PowerTig 255 EXT
Akcrawler
1/2 Star Member
1/2 Star Member
Posts: 2
Joined: Sat Feb 03, 2018 6:56 am

Re: New plasma table

Post by Akcrawler »

Thank you.
Rodw
4 Star Member
4 Star Member
Posts: 780
Joined: Sun Aug 21, 2016 1:49 am
Location: Brisbane, Australia
Contact:

Re: New plasma table

Post by Rodw »

Having built a table from scratch to my own design, it sounds simple but it is not a trivial project if your goal is to produce a commercial quality table. I started with the Z axis because I thought it was the hardest part to build and if I could build it, the rest was a walk in the park.

My abbreviated build in need of an update http://plasmaspider.com/viewtopic.php?f=103&t=22826
Much more info on the LinuxCNC forum. Just search for "spaceship plasma" there.
Post Reply

Return to “CNC Plasma Cutters General Forum”