It is currently Sun Feb 18, 2018 2:15 am

 

PLASMA TABLE PLANS

CNC Plasma Cutters are amazing and there is always plenty of knowledge to share and discuss. Use the CNC plasma cutters general forum for this purpose.
SPEEDRACERV
Posts: 4
Joined: Tue Jan 16, 2018 1:50 pm

PLASMA TABLE PLANS

Postby SPEEDRACERV » Fri Jan 19, 2018 1:03 pm

Does anyone have or recommend any plans for building a 4x8 or 5x10 table?

ScottF
Posts: 16
Joined: Wed Nov 29, 2017 10:48 pm
Location: Colorado

Re: PLASMA TABLE PLANS

Postby ScottF » Fri Jan 19, 2018 4:47 pm

Try taking a look in the DIY table section. Doing a quick search might bring up some threads for you.
ShopSabre Sidekick 8 with water table
Ingersoll Rand 5hp 60 gal
Lincoln Square Wave 200
14x40 lathe

SPEEDRACERV
Posts: 4
Joined: Tue Jan 16, 2018 1:50 pm

Re: PLASMA TABLE PLANS

Postby SPEEDRACERV » Wed Jan 24, 2018 1:30 pm

Aldridge204.jpg

I saw this one and I think I want to copy this design any one have any knowledge of it?

You do not have access to download this dxf file.
Become a Contributing Member to gain access to the thousands of files shared by our members. Click Here


User avatar
acourtjester
Elite Contributing Member
Elite Contributing Member
Posts: 2916
Joined: Sat Jun 02, 2012 6:04 pm
Location: Pensacola, Fla

Re: PLASMA TABLE PLANS

Postby acourtjester » Thu Jan 25, 2018 8:34 am

Hi PM sent
have fun
Tom
DIY 4X4 Plasma/Router Table
CandCNC DTHC-IV & Feather Touch
Hypertherm PM65 Machine Torch
Drag Knife and Scribe
Miller Mig welder
13" metal lathe
Small Mill
Everlast PM 256 tig


jimcolt
Elite Contributing Member
Elite Contributing Member
Posts: 2818
Joined: Mon Jul 20, 2009 11:18 pm
Location: New Hampshire

Re: PLASMA TABLE PLANS

Postby jimcolt » Fri Jan 26, 2018 10:19 am

Go to www.precisionplasmaLLC.com and you will find plans, parts, ideas. Jim Colt Hypertherm

gblaylo
Elite Contributing Member
Elite Contributing Member
Posts: 26
Joined: Sat Jan 17, 2015 6:48 pm
Location: Valley Grande, AL

Re: PLASMA TABLE PLANS

Postby gblaylo » Fri Jan 26, 2018 3:47 pm

I used the MechMate plans and bought the prefabricate metal parts for my plasma table. Works great for plasma. The first Mechmate I built was for wood. Both are running great with no issues. This is not a kit and you will need to able to cut you metal material and weld. My plasma electronics are from CANDCNC.
Gary


Return to “CNC Plasma Cutters General Forum”

Who is online

Users browsing this forum: No registered users and 4 guests