Need help getting file into cutting shape.
-
- 1/2 Star Member
- Posts: 6
- Joined: Wed May 24, 2017 2:01 pm
Need help getting file into cutting shape.
Th attached dxf file will not import into our plasma cutting software, Vicon. I was wondering if someone could take a look and instruct me as to why and what needs to be done to it to make it cut-able, would really appreciate the help.
- rdj357
- 4 Star Elite Contributing Member
- Posts: 1165
- Joined: Sun Mar 11, 2012 4:40 pm
- Location: Tahlequah, OK
- Contact:
Re: Need help getting file into cutting shape.
Before the deluge of jokes arrive about your transparent file - I think it didn't attach. You can try to post it again here or email it to me and I'll take a look. info at FourNinetyCreations dot com.
Robert Johnson
----- PlasmaCam 5x10 Table -----
FourNinety Creations & Learn PC, LLC
Plasmacam Goodies! Snap'NCut Mount, AXXON Cards/Cables, Maintenance Items
Learn Plasmacam Workshops
Learn Plasmacam on Facebook
Learn Plasmacam on YouTube
----- PlasmaCam 5x10 Table -----
FourNinety Creations & Learn PC, LLC
Plasmacam Goodies! Snap'NCut Mount, AXXON Cards/Cables, Maintenance Items
Learn Plasmacam Workshops
Learn Plasmacam on Facebook
Learn Plasmacam on YouTube
-
- 1/2 Star Member
- Posts: 6
- Joined: Wed May 24, 2017 2:01 pm
Re: Need help getting file into cutting shape.
I will do both thank you.
-
- 1/2 Star Member
- Posts: 6
- Joined: Wed May 24, 2017 2:01 pm
Re: Need help getting file into cutting shape.
The file is 5mb, probably too big to upload here?
- Larry83301
- 5 Star Elite Contributing Member
- Posts: 2647
- Joined: Tue Oct 27, 2009 6:36 pm
- Location: Twin Falls, Idaho
Re: Need help getting file into cutting shape.
RAR the file and it should post here.Deadhorse wrote:The file is 5mb, probably too big to upload here?
Larry
- rdj357
- 4 Star Elite Contributing Member
- Posts: 1165
- Joined: Sun Mar 11, 2012 4:40 pm
- Location: Tahlequah, OK
- Contact:
Re: Need help getting file into cutting shape.
Probably so. The cleaned up an bridged version I emailed back to you is 70.8k so it should upload here to share if you want.
Robert Johnson
----- PlasmaCam 5x10 Table -----
FourNinety Creations & Learn PC, LLC
Plasmacam Goodies! Snap'NCut Mount, AXXON Cards/Cables, Maintenance Items
Learn Plasmacam Workshops
Learn Plasmacam on Facebook
Learn Plasmacam on YouTube
----- PlasmaCam 5x10 Table -----
FourNinety Creations & Learn PC, LLC
Plasmacam Goodies! Snap'NCut Mount, AXXON Cards/Cables, Maintenance Items
Learn Plasmacam Workshops
Learn Plasmacam on Facebook
Learn Plasmacam on YouTube