Vinyl/plastic back layer

For general topics and questions that do not fit into any of the other categories or forums.
Post Reply
Hambone404
1 Star Member
1 Star Member
Posts: 24
Joined: Sat Jan 03, 2015 8:58 am

Vinyl/plastic back layer

Post by Hambone404 »

Hi,

I am making an indoor sign about 47" x 32" and need to glue some light colored vinyl/plastic type material to make the letters stand out. Can anyone recommend a type of material and source?

Thanks,
Brad
tcaudle
4 Star Elite Contributing Member
4 Star Elite Contributing Member
Posts: 1353
Joined: Tue Feb 28, 2012 6:47 pm

Re: Vinyl/plastic back layer

Post by tcaudle »

Sign Vinyl has very aggressive adhesive and is the same color on both sides. Most of it is outdoor rated .
tcaudle
4 Star Elite Contributing Member
4 Star Elite Contributing Member
Posts: 1353
Joined: Tue Feb 28, 2012 6:47 pm

Re: Vinyl/plastic back layer

Post by tcaudle »

Sources" Ordway, SignWarehouse, others
mdwalker
3.5 Star Elite Contributing Member
3.5 Star Elite Contributing Member
Posts: 524
Joined: Fri Nov 14, 2008 10:20 am

Re: Vinyl/plastic back layer

Post by mdwalker »

Danny Walker
Walker Manufacturing
Tishomingo, Oklahoma USA
www.walkermfg.net
Hambone404
1 Star Member
1 Star Member
Posts: 24
Joined: Sat Jan 03, 2015 8:58 am

Re: Vinyl/plastic back layer

Post by Hambone404 »

Thanks guys!
Post Reply

Return to “CNC Plasma Cutters General Forum”