Anyone have any experience with commercial grade LED string lights? I have a customer that wants an outdoor sign lighted. 110 volt preferably. Does anyone have a good source for them?
Thank you
Gary
Looking for outdoor led strong lights.
-
Kibby
- 1.5 Star Member
- Posts: 36
- Joined: Mon May 26, 2014 7:16 pm
-
little blue choo
- 4 Star Member
- Posts: 1460
- Joined: Mon Mar 02, 2015 10:38 pm
- Location: Cherryville NC
- Contact:
Re: Looking for outdoor led strong lights.
How will it be lighted? From the inside?
Rick
Rick
Rick
Arclight 9600 4x8 table
Hypertherm PM65
Acc. Plate Marker, 4 inch Pipe Cutter, Wood Router package
Quincy Q54 compressor 2 stage, 5hp, 60 gal
Refrigerated air dryer & 4 stage filtration system
Software Mach 3, Sheetcam, Solid Edge 2D, Inkscape
Arclight 9600 4x8 table
Hypertherm PM65
Acc. Plate Marker, 4 inch Pipe Cutter, Wood Router package
Quincy Q54 compressor 2 stage, 5hp, 60 gal
Refrigerated air dryer & 4 stage filtration system
Software Mach 3, Sheetcam, Solid Edge 2D, Inkscape
-
Kibby
- 1.5 Star Member
- Posts: 36
- Joined: Mon May 26, 2014 7:16 pm
Re: Looking for outdoor led strong lights.
Yes from the inside.
-
little blue choo
- 4 Star Member
- Posts: 1460
- Joined: Mon Mar 02, 2015 10:38 pm
- Location: Cherryville NC
- Contact:
Re: Looking for outdoor led strong lights.
The last one I did was for a bar and after powder coating it I painted the inside with chrome paint and just installed 2 LED flood light bulbs from Lowes. They wanted it show up good and it did. About too bright. They loved it and the cost was near nothing.
Rick
Rick
Rick
Arclight 9600 4x8 table
Hypertherm PM65
Acc. Plate Marker, 4 inch Pipe Cutter, Wood Router package
Quincy Q54 compressor 2 stage, 5hp, 60 gal
Refrigerated air dryer & 4 stage filtration system
Software Mach 3, Sheetcam, Solid Edge 2D, Inkscape
Arclight 9600 4x8 table
Hypertherm PM65
Acc. Plate Marker, 4 inch Pipe Cutter, Wood Router package
Quincy Q54 compressor 2 stage, 5hp, 60 gal
Refrigerated air dryer & 4 stage filtration system
Software Mach 3, Sheetcam, Solid Edge 2D, Inkscape
-
jimcolt
- 5 Star Elite Contributing Member
- Posts: 3087
- Joined: Mon Jul 20, 2009 11:18 pm
- Location: North Carolina
Re: Looking for outdoor led strong lights.
Go to Sign Lighting World .com . I have had great experiences with them.....they will help you determine the correct products and prices are low in my opinion. Jim Colt Hypertherm
