It is currently Sun Dec 10, 2017 9:14 pm

 

Hello, Newbie from England

CNC Plasma Cutters are amazing and there is always plenty of knowledge to share and discuss. Use the CNC plasma cutters general forum for this purpose.
AD80
Posts: 11
Joined: Fri Jul 14, 2017 4:12 pm

Hello, Newbie from England

Postby AD80 » Fri Jul 14, 2017 5:16 pm

Hi folks,


Newly registered on this forum - it's an absolute goldmine to someone like myself! I'm based in the U.K. and have just recently purchased Swiftcut PRO-3000 with Hypertherm 125.

I'm totally new to this CNC milarky so it's a huge learning curve! New CAD programmes to get to grips with, how to use files, learning the does and dont's etc.

I'm sure I'll have plenty of questions for everyone to answer! :D

Cheers!

plasmanewbie
Posts: 176
Joined: Thu Jul 24, 2008 11:15 am

Re: Hello, Newbie from England

Postby plasmanewbie » Mon Jul 17, 2017 9:38 am

Welcome to the forum AD80, you will find this site to be the best resource ever when getting started. Helped me a ton and I can't thank all the members who's posts have assisted me in my struggles getting started :D
Not so "newbie" anymore!

User avatar
SeanP
Elite Contributing Member
Elite Contributing Member
Posts: 725
Joined: Thu Aug 01, 2013 11:50 am
Location: Co Kerry, Ireland

Re: Hello, Newbie from England

Postby SeanP » Mon Jul 17, 2017 1:56 pm

Hi, welcome to the forum, that's a nice setup you got there!
I'm originally from Lancashire but moved over to Ireland a few years ago.
It is a fair bit to get into, but all good fun or mostly!
plenty of help out there, just ask if you get stuck.
Powermax 45XP
Home built table, Candcnc DTHC 2, Dragoncut 620-4
R-Tech 210 Tig, Jasic 250 mig
Sheetcam, Scanything, Coreldraw X8, Solidworks
Table build gallery

AD80
Posts: 11
Joined: Fri Jul 14, 2017 4:12 pm

Re: Hello, Newbie from England

Postby AD80 » Mon Jul 17, 2017 5:54 pm

plasmanewbie wrote:Welcome to the forum AD80, you will find this site to be the best resource ever when getting started. Helped me a ton and I can't thank all the members who's posts have assisted me in my struggles getting started :D


Thanks - when I'm left scratching my head it'll be the first place I'll look! :)

AD80
Posts: 11
Joined: Fri Jul 14, 2017 4:12 pm

Re: Hello, Newbie from England

Postby AD80 » Mon Jul 17, 2017 6:01 pm

SeanP wrote:Hi, welcome to the forum, that's a nice setup you got there!
I'm originally from Lancashire but moved over to Ireland a few years ago.
It is a fair bit to get into, but all good fun or mostly!
plenty of help out there, just ask if you get stuck.


Thanks Sean - Yeah it's a great setup, really happy with it. Just need to learn to use it now! It takes getting used to then software, im using solid edge 2d draft, solid works 3D and Inkscape.

User avatar
little blue choo
Elite Contributing Member
Elite Contributing Member
Posts: 1312
Joined: Mon Mar 02, 2015 10:38 pm
Location: Cherryville NC
Contact:

Re: Hello, Newbie from England

Postby little blue choo » Mon Jul 17, 2017 10:27 pm

Welcome aboard AD80. Please become a contriduting member. That will allow you to download many files. It will be the best $20 you ever spend.

Rick
Rick
Arclight 9600 4x8 table
Hypertherm PM65
Acc. Plate Marker, 4 inch Pipe Cutter, Wood Router package
Quincy Q54 compressor 2 stage, 5hp, 60 gal
Refrigerated air dryer & 4 stage filtration system
Software Mach 3, Sheetcam, Solid Edge 2D, Inkscape

AD80
Posts: 11
Joined: Fri Jul 14, 2017 4:12 pm

Re: Hello, Newbie from England

Postby AD80 » Tue Jul 18, 2017 7:25 am

little blue choo wrote:Welcome aboard AD80. Please become a contriduting member. That will allow you to download many files. It will be the best $20 you ever spend.

Rick


Thanks - just contributed! ;)

User avatar
Gamelord
Elite Contributing Member
Elite Contributing Member
Posts: 1579
Joined: Wed Aug 29, 2012 5:17 pm
Contact:

Re: Hello, Newbie from England

Postby Gamelord » Fri Jul 21, 2017 12:40 am

Welcome, if you have any questions, post em up, plenty of people here who are eager to help.
Once you take flight, your eyes will forever be turned to the sky." "Lack of appreciation is the worlds biggest crime."

Torchmate 6x14 w/THC Downdraft
Thermal Dynamics Cutmaster 101
Corel Draw / Adobe Illustrator
Torchmate CAD


Return to “CNC Plasma Cutters General Forum”

Who is online

Users browsing this forum: No registered users and 10 guests