Log in issue
-
- 3 Star Member
- Posts: 311
- Joined: Fri Oct 31, 2014 8:50 am
- Location: East Tennessee
Log in issue
Is it just me or is there anyone else out there that has to keep logging in. I've clear my Cache files countless times and still having to log in continuously. Getting to be a real pain in the rear.
- little blue choo
- 4 Star Member
- Posts: 1460
- Joined: Mon Mar 02, 2015 10:38 pm
- Location: Cherryville NC
- Contact:
Re: Log in issue
This has happened to be several times. At one time it was so bad I just about left the site but worked with the administrator and got it about fixed. Now it only happens about twice a night. Good luck, I hope you can get your issue worked out. If you do let the rest of us know.
Rick
Rick
Rick
Arclight 9600 4x8 table
Hypertherm PM65
Acc. Plate Marker, 4 inch Pipe Cutter, Wood Router package
Quincy Q54 compressor 2 stage, 5hp, 60 gal
Refrigerated air dryer & 4 stage filtration system
Software Mach 3, Sheetcam, Solid Edge 2D, Inkscape
Arclight 9600 4x8 table
Hypertherm PM65
Acc. Plate Marker, 4 inch Pipe Cutter, Wood Router package
Quincy Q54 compressor 2 stage, 5hp, 60 gal
Refrigerated air dryer & 4 stage filtration system
Software Mach 3, Sheetcam, Solid Edge 2D, Inkscape
- Gamelord
- 4.5 Star Member
- Posts: 1637
- Joined: Wed Aug 29, 2012 5:17 pm
- Contact:
Re: Log in issue
There was a thread that had the fix. I think the way to fix was to download CCleaner and have it do a full clean of your system, cache, old files, hidden windows internet files that normal cleaning doesn't fix. Run that and you should be good to go.
Found the other thread:
http://plasmaspider.com/viewtopic.php?f ... er#p136189
Found the other thread:
http://plasmaspider.com/viewtopic.php?f ... er#p136189
Once you take flight, your eyes will forever be turned to the sky." "Lack of appreciation is the worlds biggest crime."
Torchmate 6x14 w/THC Downdraft
Thermal Dynamics Cutmaster 101
Corel Draw / Adobe Illustrator
Torchmate CAD
Torchmate 6x14 w/THC Downdraft
Thermal Dynamics Cutmaster 101
Corel Draw / Adobe Illustrator
Torchmate CAD
- admin
- Site Admin
- Posts: 370
- Joined: Thu Jul 03, 2008 5:12 pm
- Location: Out In The Shop
- Contact:
Re: Log in issue
PM's sent to you guys so we can dig a little deeper but really have had no complaints about this lately until this recent thread.
-
- 4.5 Star Elite Contributing Member
- Posts: 1649
- Joined: Tue Feb 22, 2011 5:15 pm
- Location: Mountain City, Tennessee
Re: Log in issue
I had the same problem recently but seems to be working fine now. Does anyone have a problem with the back button not working. I have to scroll up and go back to the main menu. Only happens on this website.
Dave Hanks
Dave Hanks
-
- 2.5 Star Member
- Posts: 120
- Joined: Wed Nov 26, 2014 9:13 am
- Location: Portage, WI
Re: Log in issue
I am currently experiencing this issue.
Very annoying.
Very annoying.
Custom LDR Motion Systems 5x10 table w/ rotary axis and scribe
Hypertherm Powermax85
Quincy 325 compressor
Ingersoll Rand D18IN refrigerated air dryer
Millermatic 251 MIG
Everlast PowerPro 256 TIG/stick/plasma w/ water cooler
Hypertherm Powermax85
Quincy 325 compressor
Ingersoll Rand D18IN refrigerated air dryer
Millermatic 251 MIG
Everlast PowerPro 256 TIG/stick/plasma w/ water cooler
- Larry83301
- 5 Star Elite Contributing Member
- Posts: 2647
- Joined: Tue Oct 27, 2009 6:36 pm
- Location: Twin Falls, Idaho
Re: Log in issue
I had this same issue and found that when I closed the window that PS was open in my history was cleared every time. It did not matter if other windows were open or not the history was cleared. What I had to do was close ALL windows open to the internet, open ONE window and then change the option to NOT clear the history, then close that window so it would save my settings. Then when I signed into PS it would keep me signed in no matter how many times I closed that window.
Larry
Larry
- little blue choo
- 4 Star Member
- Posts: 1460
- Joined: Mon Mar 02, 2015 10:38 pm
- Location: Cherryville NC
- Contact:
Re: Log in issue
Just happen to me again. Some times I can hit the back button and be signed in again. Just went to write this comment and I had to sign again, that's twice. I really hate it when I write a long reply and hit submit only to be told I have to log in.
Rick
Rick
Rick
Arclight 9600 4x8 table
Hypertherm PM65
Acc. Plate Marker, 4 inch Pipe Cutter, Wood Router package
Quincy Q54 compressor 2 stage, 5hp, 60 gal
Refrigerated air dryer & 4 stage filtration system
Software Mach 3, Sheetcam, Solid Edge 2D, Inkscape
Arclight 9600 4x8 table
Hypertherm PM65
Acc. Plate Marker, 4 inch Pipe Cutter, Wood Router package
Quincy Q54 compressor 2 stage, 5hp, 60 gal
Refrigerated air dryer & 4 stage filtration system
Software Mach 3, Sheetcam, Solid Edge 2D, Inkscape
- acourtjester
- 6 Star Elite Contributing Member
- Posts: 7784
- Joined: Sat Jun 02, 2012 6:04 pm
- Location: Pensacola, Fla
Re: Log in issue
Last time that happened to me I worked with Admin and this is what he had me do to fix it. The KEY word here is "I think"
You currently do not have access to download this file.
To gain download access for DXF, SVG & other files Click Here
DIY 4X4 Plasma/Router Table
Hypertherm PM65 Machine Torch
Drag Knife and Scribe
Miller Mig welder
13" metal lathe
Small Mill
Everlast PowerTig 255 EXT
Hypertherm PM65 Machine Torch
Drag Knife and Scribe
Miller Mig welder
13" metal lathe
Small Mill
Everlast PowerTig 255 EXT
-
- 2.5 Star Elite Contributing Member
- Posts: 149
- Joined: Tue Apr 17, 2012 3:48 pm
- Location: S/W Louisiana
Re: Log in issue
same issue. log in over and over.