Has anyone had experience using this machine or know someone who does use it. All made in England, possibly the ones in the states are made in USA.
They seem to have integrated the Hypertherm units to the systems.
Just wondering if anyone has an opinion on them.
They have a 2'x 2' to up to standard sheet sizes as well.
My only choice here in N Z is some crap imported from China or import from the USA which I did with my Torchmate 2x4. Now I need to upgrade to a larger format and just doing cost comparison as the Swiftcut is now selling in NZ.
Larry Cameron
Swiftcut Plasma
- larrycameron44
- 3.5 Star Member
- Posts: 579
- Joined: Sun Oct 31, 2010 4:12 pm
- Location: Auckland New Zealand
-
- 5 Star Elite Contributing Member
- Posts: 3087
- Joined: Mon Jul 20, 2009 11:18 pm
- Location: North Carolina
Re: Swiftcut Plasma
Swiftcut has been designing and building their machines in the UK for a few years and have a pretty good sized installed base of machines in Europe. The machines are very well built and well accepted by their customers. Recently Swiftcut opened an office here in the U.S., the systems are still built in the UK at this time. Website is www.swift-cut.us.com Jim Colt Hypertherm
- larrycameron44
- 3.5 Star Member
- Posts: 579
- Joined: Sun Oct 31, 2010 4:12 pm
- Location: Auckland New Zealand
Re: Swiftcut Plasma
Thanks Jim, appreciate the feedback.
larry
larry