Weld Button or Rose Head Nail

[Nacs Fab]

I have a big project where I need about 300 of the forged looking nail heads to weld on the edge of a counter top, similar to the image. Do any of you know what the industry name is for these, I would rather not buy actual rose head nails and then have to cut 300 of them down to nearly flush. What my plan was is to have a short shank to protrude through 14 gauge, then I can weld on the back side. Any help is much appreciated

bar-top-frame-base-and-wall-covering.jpg

!

[Stout]

Rivets. Weld em on and grind em down.

http://www.blacksmithbolt.com/store/c/52-Rivets.aspx
http://www.blacksmithsdepot.com/bolts-a ... ivets.html

[9er]

I use these.

http://www.kingmetals.com/Catalog/ItemC ... =796&NSM=Y

The shank actually snaps off and you can do a quick rosette thru a blind hole on the back.

[Nacs Fab]

Thanks Guys!