I have a big project where I need about 300 of the forged looking nail heads to weld on the edge of a counter top, similar to the image. Do any of you know what the industry name is for these, I would rather not buy actual rose head nails and then have to cut 300 of them down to nearly flush. What my plan was is to have a short shank to protrude through 14 gauge, then I can weld on the back side. Any help is much appreciated
!
Weld Button or Rose Head Nail
- Nacs Fab
- 3 Star Member
- Posts: 328
- Joined: Tue Dec 04, 2012 4:11 pm
- Location: Columbia, MO
Weld Button or Rose Head Nail
You currently do not have access to download this file.
To gain download access for DXF, SVG & other files Click Here
Shop Droids Plasmabot 3.0 DIY 4x8 with water table
G540 with LCTHC by candcnc
Hypertherm 1250 with Duramax Torch Upgrade
all built... by me...
G540 with LCTHC by candcnc
Hypertherm 1250 with Duramax Torch Upgrade
all built... by me...
-
- 3 Star Elite Contributing Member
- Posts: 255
- Joined: Wed Apr 29, 2009 8:14 am
- Location: Helotes, TX
Re: Weld Button or Rose Head Nail
Rivets. Weld em on and grind em down.
http://www.blacksmithbolt.com/store/c/52-Rivets.aspx
http://www.blacksmithsdepot.com/bolts-a ... ivets.html
http://www.blacksmithbolt.com/store/c/52-Rivets.aspx
http://www.blacksmithsdepot.com/bolts-a ... ivets.html
Victor Simonis
Grey Forest MetalCraft
Helotes, TX 78023
210-872-2622
Sector Technologies Photon 5x10 water table machine with Hypertherm Micro Edge Controller, Powermax 105
Grey Forest MetalCraft
Helotes, TX 78023
210-872-2622
Sector Technologies Photon 5x10 water table machine with Hypertherm Micro Edge Controller, Powermax 105
- 9er
- 1.5 Star Member
- Posts: 41
- Joined: Sun Mar 06, 2016 11:04 pm
Re: Weld Button or Rose Head Nail
I use these.
http://www.kingmetals.com/Catalog/ItemC ... =796&NSM=Y
The shank actually snaps off and you can do a quick rosette thru a blind hole on the back.
http://www.kingmetals.com/Catalog/ItemC ... =796&NSM=Y
The shank actually snaps off and you can do a quick rosette thru a blind hole on the back.
Arclight Arc Pro 12000
Hypertherm PM85
Hypertherm PM85
- Nacs Fab
- 3 Star Member
- Posts: 328
- Joined: Tue Dec 04, 2012 4:11 pm
- Location: Columbia, MO
Re: Weld Button or Rose Head Nail
Thanks Guys!
Shop Droids Plasmabot 3.0 DIY 4x8 with water table
G540 with LCTHC by candcnc
Hypertherm 1250 with Duramax Torch Upgrade
all built... by me...
G540 with LCTHC by candcnc
Hypertherm 1250 with Duramax Torch Upgrade
all built... by me...