Could someone create a cut file for me. Im on the road without computer. My nephew helps me in shop but doesnt know how to create cut files but does know how to import to machine and cut out parts. Trying to have this part cut asap. Thanks to whoever can help in advance!!!
OD of outer circle is 8.625"
ID of inner circle is 4"
Smaller 6 holes are .6"
Small holes are .25" from OD from measuring from top of small hole. Bottom of small holes are 1.44" from 4" ID hole measuring from bottom of small hole. Small holes are evenly spread out around circle.
need file drawn
- KeeYaw
- 2.5 Star Member
- Posts: 108
- Joined: Tue Sep 24, 2013 5:09 pm
need file drawn
You currently do not have access to download this file.
To gain download access for DXF, SVG & other files Click Here
-
- 2.5 Star Member
- Posts: 163
- Joined: Tue Apr 19, 2016 10:29 pm
- Location: In the way.
Re: need file drawn
I'm not good yet, I will have a go at it!
david
david
-
- 3 Star Elite Contributing Member
- Posts: 445
- Joined: Sat Jul 04, 2015 10:43 pm
Re: need file drawn
SheetCam has a program for it. Give me one minute
Steve
Platform CNC Plasma table
CandCNC Ethercut IV DTHC
Hypertherm 85/CPC/RS485
Miller 350P
Miller Dynasty 280DX
Platform CNC Plasma table
CandCNC Ethercut IV DTHC
Hypertherm 85/CPC/RS485
Miller 350P
Miller Dynasty 280DX
-
- 3 Star Elite Contributing Member
- Posts: 445
- Joined: Sat Jul 04, 2015 10:43 pm
Re: need file drawn
If he has SheetCam here is the part
You currently do not have access to download this file.
To gain download access for DXF, SVG & other files Click Here
Steve
Platform CNC Plasma table
CandCNC Ethercut IV DTHC
Hypertherm 85/CPC/RS485
Miller 350P
Miller Dynasty 280DX
Platform CNC Plasma table
CandCNC Ethercut IV DTHC
Hypertherm 85/CPC/RS485
Miller 350P
Miller Dynasty 280DX
- Francisco
- 2.5 Star Elite Contributing Member
- Posts: 177
- Joined: Tue Feb 23, 2010 4:17 pm
Re: need file drawn
Second try... First one didn't upload.
You currently do not have access to download this file.
To gain download access for DXF, SVG & other files Click Here
-
- 2.5 Star Member
- Posts: 163
- Joined: Tue Apr 19, 2016 10:29 pm
- Location: In the way.
Re: need file drawn
[attachment=0]ring with 6 holes.dxf[/attachment]Ok, I hope this works! Finally I get to contribute something!
File should be attached.
File should be attached.
You currently do not have access to download this file.
To gain download access for DXF, SVG & other files Click Here
-
- 2.5 Star Member
- Posts: 163
- Joined: Tue Apr 19, 2016 10:29 pm
- Location: In the way.
Re: need file drawn
I was too slow. OH well, learned how to do it.
DAvid
DAvid
- KeeYaw
- 2.5 Star Member
- Posts: 108
- Joined: Tue Sep 24, 2013 5:09 pm
Re: need file drawn
Thank yall very much!!! cant say thanks enough!!!