I use Solidworks on my desktop for drawing and viewing DXF files, but I would like to put something on my laptop for viewing and editing DXF files and I do not want to get into the big money like I did with Solidworks. What free or cheap software do you guys like or prefer?
Thanks!
DXF Viewer?
- little blue choo
- 4 Star Member
- Posts: 1460
- Joined: Mon Mar 02, 2015 10:38 pm
- Location: Cherryville NC
- Contact:
Re: DXF Viewer?
Solid Edge 2D drafting is Free and works pretty good. Down load only takes a few minutes. If you don't like it you haven't lost anything.
Rick
Rick
Rick
Arclight 9600 4x8 table
Hypertherm PM65
Acc. Plate Marker, 4 inch Pipe Cutter, Wood Router package
Quincy Q54 compressor 2 stage, 5hp, 60 gal
Refrigerated air dryer & 4 stage filtration system
Software Mach 3, Sheetcam, Solid Edge 2D, Inkscape
Arclight 9600 4x8 table
Hypertherm PM65
Acc. Plate Marker, 4 inch Pipe Cutter, Wood Router package
Quincy Q54 compressor 2 stage, 5hp, 60 gal
Refrigerated air dryer & 4 stage filtration system
Software Mach 3, Sheetcam, Solid Edge 2D, Inkscape
- tnbndr
- 4.5 Star Elite Contributing Member
- Posts: 1670
- Joined: Mon Jan 09, 2012 4:30 pm
- Location: New Berlin, WI
- Contact:
Re: DXF Viewer?
Dennis
LDR 4x8, Scribe, DTHCIV
Hypertherm PM45, Macair Dryer
DeVilbiss Air America 6.5HP, 80Gal., 175psi, Two Stage
16.9scfm@100psi, 16.0scfm@175psi
Miller 215 MultiMatic
RW 390E Slip Roll (Powered)
AutoCAD, SheetCAM, Mach 3
http://ikescreations.com
LDR 4x8, Scribe, DTHCIV
Hypertherm PM45, Macair Dryer
DeVilbiss Air America 6.5HP, 80Gal., 175psi, Two Stage
16.9scfm@100psi, 16.0scfm@175psi
Miller 215 MultiMatic
RW 390E Slip Roll (Powered)
AutoCAD, SheetCAM, Mach 3
http://ikescreations.com
-
- 2 Star Member
- Posts: 59
- Joined: Fri Jul 08, 2016 11:00 am
Re: DXF Viewer?
I use this program for viewing DXF files http://www.autodwg.com/dwg-viewer/ loads quick and has a file browser
-
- 1/2 Star Member
- Posts: 2
- Joined: Wed Jan 18, 2017 7:50 am
Re: DXF Viewer?
I use SolidWorks also but use DraftSight for some of my older AutoCad .dwg's and .dxf's
Free download at...
http://www.3ds.com/products-services/dr ... -download/
Free download at...
http://www.3ds.com/products-services/dr ... -download/
-
- 1/2 Star Member
- Posts: 2
- Joined: Wed Jan 18, 2017 7:50 am
Re: DXF Viewer?
Also with every paid version of SolidWorks you can get a "Home" license to run on another computer.
- acourtjester
- 6 Star Elite Contributing Member
- Posts: 7792
- Joined: Sat Jun 02, 2012 6:04 pm
- Location: Pensacola, Fla
Re: DXF Viewer?
The thing I like about Irfanview is it puts their icon on the file so you can see which are DXF easily.
Just a double click and a small window open with an image of the file.
Just a double click and a small window open with an image of the file.
DIY 4X4 Plasma/Router Table
Hypertherm PM65 Machine Torch
Drag Knife and Scribe
Miller Mig welder
13" metal lathe
Small Mill
Everlast PowerTig 255 EXT
Hypertherm PM65 Machine Torch
Drag Knife and Scribe
Miller Mig welder
13" metal lathe
Small Mill
Everlast PowerTig 255 EXT