Hi!
I build my cnc plasma cutting table 48"x48" this year and now i want to add a thc.
i can't figure how wiring the proma thc 150 to my probotix utility cnc controller... on the information about proma thc, i think i should plug the relay output of the thc to the limit switch input of the probotix cnc controller. but the limit switch of the machine is already wiring to it! can I plug it all together?
also I'm not sure of the plus/minus connection in my miller spectrum x-treme 375
-probotic unity cnc controller 5 axes
-proma thc 150
-miller spectrum x-treme 375
-mach3 install on a old pc
can someone help me fix this?
thanks in advance
help wiring proma thc to probotix unity cnc controller
-
- 1 Star Member
- Posts: 12
- Joined: Thu Aug 14, 2014 12:36 pm
- Location: Roquemaure
-
- 5 Star Elite Contributing Member
- Posts: 3087
- Joined: Mon Jul 20, 2009 11:18 pm
- Location: North Carolina
Re: help wiring proma thc to probotix unity cnc controller
Best bet is to work with the manufacturers...Proma and Probotic. Miller can supply you with the Raw arc voltage connections.
Jim Colt Hypertherm
Jim Colt Hypertherm
-
- 1 Star Member
- Posts: 12
- Joined: Thu Aug 14, 2014 12:36 pm
- Location: Roquemaure
Re: help wiring proma thc to probotix unity cnc controller
I'm on that way , but it's always better to have many source of information
-
- 1/2 Star Member
- Posts: 1
- Joined: Wed Dec 27, 2017 3:18 pm
Re: help wiring proma thc to probotix unity cnc controller
Did you ever make out on that? I'm about to attempt the same.