Do you have a "Wall of Shame"?
- AnotherDano
- 4 Star Member
- Posts: 806
- Joined: Fri Dec 18, 2009 11:52 pm
- Location: Laramie, Wyoming
- Contact:
Do you have a "Wall of Shame"?
OldSarge mentioned his.
I have one.
How many of us do?
Dano
I have one.
How many of us do?
Dano
Dano Roberts
droberts@ironpequod.com
PlasmaCam DHC-2 v3.11
Hypertherm PowerMax-30
Serving Laramie, Wy since Thursday
droberts@ironpequod.com
PlasmaCam DHC-2 v3.11
Hypertherm PowerMax-30
Serving Laramie, Wy since Thursday
- chasxjs
- 2.5 Star Elite Contributing Member
- Posts: 225
- Joined: Sun Aug 24, 2014 10:50 pm
- Location: Lake Havasu City, Arizona
Re: Do you have a "Wall of Shame"?
I have one. I prefer to call it a wall of learning however.
Charles
____________________
DIY 5x5 Folding Plasma Table
Hypertherm PM45
Lagun 4 axis CNC Mill
Shopsmith Lathe
Multiple saws, welders, etc.
____________________
DIY 5x5 Folding Plasma Table
Hypertherm PM45
Lagun 4 axis CNC Mill
Shopsmith Lathe
Multiple saws, welders, etc.
-
- 3.5 Star Member
- Posts: 508
- Joined: Fri Apr 26, 2013 9:56 pm
Re: Do you have a "Wall of Shame"?
No, I just take it to the scrapyard. Although right now scrap is pretty worthless. I got $60 per ton last time.... not even worth the hassle! A few months ago I was getting $170 per ton and it was hardly worth it then.
- Sampson Jones
- 3 Star Elite Contributing Member
- Posts: 333
- Joined: Mon Jul 25, 2011 9:30 pm
Re: Do you have a "Wall of Shame"?
Yes , but it usually becomes something entirely different with a grinder and a welder .
My design , 4ft x 8 ft water table
CandCNC electronics
Hypertherm powermax 65
Command Lineux
Super z 2
Sheetcam
Inkscape and corel draw
CandCNC electronics
Hypertherm powermax 65
Command Lineux
Super z 2
Sheetcam
Inkscape and corel draw
-
- 2.5 Star Member
- Posts: 148
- Joined: Fri Jan 15, 2010 7:32 pm
Re: Do you have a "Wall of Shame"?
No, I throw my mistakes in the scrap pile. Then I pull them back out and chop them into small bits so the scrap yard guys don't see what I did and laugh at me.
- HammerDownJustin
- 3.5 Star Member
- Posts: 613
- Joined: Mon Mar 04, 2013 10:41 pm
- Location: Paradise,Tx
Re: Do you have a "Wall of Shame"?
Mine go to the scrap yard also..i do have a couple from non paying customers though..did get pissed once and shot one sign all to hell and then threw it in there front yard.
Home built 5x10 table CandCNC electronics
Miller 251 Mig
And lots of other cool stuff...
Miller 251 Mig
And lots of other cool stuff...
-
- 3.5 Star Member
- Posts: 563
- Joined: Fri Jan 24, 2014 11:03 pm
Re: Do you have a "Wall of Shame"?
Yes I have one.
I get asked every once in a while, hey what is all this? I just reply "experience" and go on about my business.
Shane
This almost had my iced tea coming out my nose!!!Bigrhamr wrote:No, I throw my mistakes in the scrap pile. Then I pull them back out and chop them into small bits so the scrap yard guys don't see what I did and laugh at me.
I get asked every once in a while, hey what is all this? I just reply "experience" and go on about my business.
Shane
- AnotherDano
- 4 Star Member
- Posts: 806
- Joined: Fri Dec 18, 2009 11:52 pm
- Location: Laramie, Wyoming
- Contact:
Re: Do you have a "Wall of Shame"?
We all need two of them. One for our own screwups and another for customers who didn't pay up.
These need a sign that reads something like;
"Yes, I DO require a deposit".
These need a sign that reads something like;
"Yes, I DO require a deposit".
Dano Roberts
droberts@ironpequod.com
PlasmaCam DHC-2 v3.11
Hypertherm PowerMax-30
Serving Laramie, Wy since Thursday
droberts@ironpequod.com
PlasmaCam DHC-2 v3.11
Hypertherm PowerMax-30
Serving Laramie, Wy since Thursday
-
- 1.5 Star Member
- Posts: 28
- Joined: Mon Feb 02, 2015 9:38 am
- Location: Denham Springs, Louisiana
Re: Do you have a "Wall of Shame"?
I place them under the Christmas tree.
-
- 2.5 Star Member
- Posts: 114
- Joined: Mon Apr 23, 2012 10:44 pm
- Location: Masonville IA
- Contact:
Re: Do you have a "Wall of Shame"?
if it can be fixed by cutting a new piece and welding that piece in i will weld it in or on. the other crap i just put in a pile and take it to the scrap!!
-
- 2.5 Star Member
- Posts: 218
- Joined: Sat Mar 12, 2011 11:26 pm
Re: Do you have a "Wall of Shame"?
I have a wall of shame. When I get a chance I will take a picture and post it up. Its a constant reminder that I need to pay attention to what I am doing!
Samson 510
Hypertherm PM85
Hypertherm PM85
-
- 2.5 Star Member
- Posts: 109
- Joined: Sun Mar 27, 2011 8:14 pm
- Location: on canada
Re: Do you have a "Wall of Shame"?
I try not to throw to much in the scrap. Whenever I get a tightwad customer into the shop that is the stuff in their price range. The rest gets used up on projects like the buffalo and bear.
Mark
Mark
-
- 2 Star Member
- Posts: 72
- Joined: Fri Dec 26, 2014 9:52 am
- Location: Mexico Beach, FL
Re: Do you have a "Wall of Shame"?
My "Wall of Shame" is the poem I write every year for the company Christmas party! It has really been a hit over the years! As a building construction contractor our guys have done some really really stupid stuff over the years most of the time with the best of intentions. When the guys screw up I just remind them that will be in the Chrustmas poem! They usually just shake their head, hang it low and never do that again! After nine years of an original Rewrite of The Night Before Christmas it has become a year long tradition that helps keep everyone on their toes, if nothing else we all laugh at ourselves for our screw ups! And we have had some GOOD ones!
BC
BC
-
- 4 Star Member
- Posts: 950
- Joined: Thu Jan 02, 2014 6:33 pm
Re: Do you have a "Wall of Shame"?
I throw all my wall of shame stuff in a box and throw it on craigslist as scrap metal for welding, coupons etc. I throw a USPS Medium box or rate A box up for $10 and fill it up. Sometimes it takes a little while to sell and sometimes it sells quick. Then I take my larger 2' x 2' scrap pieces and put those on CL as well. Just got rid of probably 10 sheets of steel (about 14 and 16 gauge) and 2 or 3 pieces of aluminum of about .100 thick for $40.
So far I've sold those twice. Got a third stack sitting here waiting to go next.
So far I've sold those twice. Got a third stack sitting here waiting to go next.
Torchmate 2x2 - Flashcut
Powermax 45 - Machine torch
Taig CNC Mill - Flashcut
Razorweld Distributor
Powermax 45 - Machine torch
Taig CNC Mill - Flashcut
Razorweld Distributor
-
- 3 Star Elite Contributing Member
- Posts: 255
- Joined: Tue Apr 16, 2013 8:47 pm
Re: Do you have a "Wall of Shame"?
Everything can be fixed one way or another! If its stuff I'm cutting for a craft show I will try to save it while still on the table or if its not too screwed up I will still clean it up and sell it at a discounted price.
-
- 4.5 Star Elite Contributing Member
- Posts: 1650
- Joined: Tue Feb 22, 2011 5:15 pm
- Location: Mountain City, Tennessee
Re: Do you have a "Wall of Shame"?
There is that learning curve. People who don't screw up don't do anything!
Dave Hanks
Dave Hanks
- AnotherDano
- 4 Star Member
- Posts: 806
- Joined: Fri Dec 18, 2009 11:52 pm
- Location: Laramie, Wyoming
- Contact:
Re: Do you have a "Wall of Shame"?
DXF wrote:There is that learning curve. People who don't screw up don't do anything!
Dave Hanks
My son was learning all about glass blowing because it was a major that didn't require a foreign language like most of the other majors being offered. Then he really got into it, eventually winding yup with a Masters in fine art and running the program.
I still have one of his first pieces and it is just as prized as the rest of them!
But damn, it's ugly.
Dano Roberts
droberts@ironpequod.com
PlasmaCam DHC-2 v3.11
Hypertherm PowerMax-30
Serving Laramie, Wy since Thursday
droberts@ironpequod.com
PlasmaCam DHC-2 v3.11
Hypertherm PowerMax-30
Serving Laramie, Wy since Thursday
-
- 2.5 Star Elite Contributing Member
- Posts: 178
- Joined: Sun Jul 18, 2010 7:59 pm
Re: Do you have a "Wall of Shame"?
.
Last edited by eggauto on Tue Feb 24, 2015 10:48 pm, edited 1 time in total.
-
- 3.5 Star Elite Contributing Member
- Posts: 590
- Joined: Thu May 12, 2011 4:28 pm
Re: Do you have a "Wall of Shame"?
Second thing pointed to with a new customer (about 5 years old now..no rust, lol)