Favorite Fonts-Stencil

For general topics and questions that do not fit into any of the other categories or forums.
Post Reply
karensmc
1 Star Member
1 Star Member
Posts: 20
Joined: Mon Jan 02, 2017 3:30 pm

Favorite Fonts-Stencil

Post by karensmc »

What are everyone's favorite or go to stencil fonts? I went on "dafonts" and there are so many to choose from!
Which ones have you found work well and cut without problems at all sizes.
Thanks!
Karen
User avatar
little blue choo
4 Star Member
4 Star Member
Posts: 1460
Joined: Mon Mar 02, 2015 10:38 pm
Location: Cherryville NC
Contact:

Re: Favorite Fonts-Stencil

Post by little blue choo »

I usually look for a font that complements my design and then stencil it myself. Now to answer you question there is no stencil font that cuts perfect at all sizes. One that I found works good and is easy to change is Bauhaus 93. If someone is wanting to learn to stencil a font, Bauhaus 93 is a great one to start with. It's simple and teaches you where the letters look good stenciled.

Rick
Rick
Arclight 9600 4x8 table
Hypertherm PM65
Acc. Plate Marker, 4 inch Pipe Cutter, Wood Router package
Quincy Q54 compressor 2 stage, 5hp, 60 gal
Refrigerated air dryer & 4 stage filtration system
Software Mach 3, Sheetcam, Solid Edge 2D, Inkscape
karensmc
1 Star Member
1 Star Member
Posts: 20
Joined: Mon Jan 02, 2017 3:30 pm

Re: Favorite Fonts-Stencil

Post by karensmc »

Rick..I tried to load that font..but it's no longer available. :(
How do you go about changing a font to make it a stencil?
Thanks!
Karen
Post Reply

Return to “CNC Plasma Cutters General Forum”