new fibre laser machine

For general topics and questions that do not fit into any of the other categories or forums.
Post Reply
dikko
2.5 Star Member
2.5 Star Member
Posts: 197
Joined: Sat Aug 13, 2011 7:56 am

new fibre laser machine

Post by dikko »

hello everyone hope all is good on the other side of the world
i thought i would just say hello and thanks for some of the most amazing cut files ive ever seen.I recently purchased a 1.5kwtt fibre laser machine and i must say its bloody brilliant.no more clean up... still have my torchmate 3 with its hypertherm 100 and still going strong,I have a problem someone of greater knowledge than me might be able to solve??? i love cutting the live love laugh sign ,which cuts great on plazz ,but on laser shows broken lines right across the bottom has anyone else seen this?? .anyway keep on cutting and take care from here in australia
greg
Redneck
3 Star Member
3 Star Member
Posts: 273
Joined: Sat Oct 06, 2012 7:16 pm

Re: new fibre laser machine

Post by Redneck »

What kind of laser did you get?
abcofab
2.5 Star Elite Contributing Member
2.5 Star Elite Contributing Member
Posts: 166
Joined: Thu Jun 16, 2011 9:19 am
Location: Marshfield, MA.
Contact:

Re: new fibre laser machine

Post by abcofab »

Can you post the sign you are trying to cut, I cut with waterjet and is very similar to laser quality. Maybe I can help.
Omax 80X Waterjet 6 x 12 with Tilt-A-Jet
CamFive 150w Co2 Laser
Miller Mig & Tig
Whitney-Jenson 20 ton Punch Press
Atlas Lathe
dikko
2.5 Star Member
2.5 Star Member
Posts: 197
Joined: Sat Aug 13, 2011 7:56 am

Re: new fibre laser machine

Post by dikko »

i brought a bodor laser
Kibby
1.5 Star Member
1.5 Star Member
Posts: 36
Joined: Mon May 26, 2014 7:16 pm

Re: new fibre laser machine

Post by Kibby »

Could you tell us a little bit about your laser? Size, capacity ? Cost? Thanks
BensPlasmaAu
2.5 Star Member
2.5 Star Member
Posts: 209
Joined: Mon Jan 13, 2014 10:37 am
Location: Boronia, Melbourne, Australia

Re: new fibre laser machine

Post by BensPlasmaAu »

Where abouts in Auatralia are you?
Home built 3400 x 1400mm (11 and a bit X a bit over 4.5 feet)
Hypertherm Powermax 45
CandCNC Bladerunner IV
Some air dryer off the internet
Another water seperator I found unused on a shelf
Refrigerated air dryer
Post Reply

Return to “CNC Plasma Cutters General Forum”