CNC Laser

For general topics and questions that do not fit into any of the other categories or forums.
Post Reply
Dawgonhawg
3 Star Member
3 Star Member
Posts: 487
Joined: Sun Mar 27, 2011 10:13 pm

CNC Laser

Post by Dawgonhawg »

Guys know this is primary CNC Plasma site which that is what a have. A antique Dynatorch which still works good.
Looking for recommendations for a CNC laser machine. Your input will be appreciated.

Jim
tcaudle
4 Star Elite Contributing Member
4 Star Elite Contributing Member
Posts: 1353
Joined: Tue Feb 28, 2012 6:47 pm

Re: CNC Laser

Post by tcaudle »

For cutting what? If its metal then prices start around 250K and go up to 1.5M,
Greg_R
1.5 Star Member
1.5 Star Member
Posts: 34
Joined: Sun Jan 14, 2018 10:31 pm

Re: CNC Laser

Post by Greg_R »

80 watt laser for wood? Sinjoe for sure. Servo motors and best controllers, and best price. I was referred them by Dave over at Sawmillcreek forums. He seems to be the laser guru there.
DaltonMurphy
1 Star Member
1 Star Member
Posts: 22
Joined: Wed Feb 14, 2018 3:31 pm

Re: CNC Laser

Post by DaltonMurphy »

find a used amada laser 15-20k reliable good service techs and u can do metal or wood.
mrd0477
1/2 Star Member
1/2 Star Member
Posts: 6
Joined: Mon Nov 13, 2017 8:59 am

Re: CNC Laser

Post by mrd0477 »

Im building a new table that will house a 150w co2 and im using the sinjoe controller. Im going to attempt to have it operate the plasma torch under the 2nd laser. If it all works, yay me. If not, Ill be building a 3rd table lol.
ROCKY
1.5 Star Member
1.5 Star Member
Posts: 33
Joined: Tue Feb 17, 2009 4:26 pm

Re: CNC Laser

Post by ROCKY »

I use a TRUMPF 1030 tru-laser at work. 2000 watt CO2 laser.
Great machine, easy programming, excellent company support.
1/2in capacity steel 1/4 in stainless. Cuts like a razor blade.
Note: Not made by our president...LOL
Post Reply

Return to “CNC Plasma Cutters General Forum”