SIZING PROBLEM

For general topics and questions that do not fit into any of the other categories or forums.
Post Reply
FamilyFab
1/2 Star Member
1/2 Star Member
Posts: 2
Joined: Wed Feb 14, 2018 4:56 pm

SIZING PROBLEM

Post by FamilyFab »

First off I'm new at this just learning my way. I am having a problem when transferring work from one program to another. I'm designing in torchmate cad lite 9. but when I transfer it to torchmate 4 to cut it the sizing is not the same. It doubles the height and divides the width in half. Any help would be greatly appreciated.
User avatar
larrycameron44
3.5 Star Member
3.5 Star Member
Posts: 579
Joined: Sun Oct 31, 2010 4:12 pm
Location: Auckland New Zealand

Re: SIZING PROBLEM

Post by larrycameron44 »

It’s a easy fix from memory, email Torchmate and they will help or join Fabrication Forum and pose question there.
https://www.fabricationforum.com/

Larry Cameron
RusticMetalArt
FamilyFab
1/2 Star Member
1/2 Star Member
Posts: 2
Joined: Wed Feb 14, 2018 4:56 pm

Re: SIZING PROBLEM

Post by FamilyFab »

OK THANKS. larrycameron44
Post Reply

Return to “CNC Plasma Cutters General Forum”