Truck Stuff

[Burnt]

Here is a few truck bumpers that I have done, working on a matching rear bumper now....

[Burnt]

did this swing away Expi tire carrier too...

[AnotherDano]

Man, you're makin' some serious stuff there.
Great job and thanks for sharing.

Dano

[stdave66]

Awesome work! Love the bumpers!

[Kentuckyfarmer]

I have a quick question, do you sell these bumpers? and if so what precautions does one take to prevent a lawsuit in this lawyer ridden society?
I have had people want things like this built, but a local machine shop always shied away from any thing that modified the function of a onroad vehicle, especialy safty related.
BTW those are great looking bumpers well made and alot of skill and time went into them. I am not trying to be a smart ass, just a legitquestion, personly we have to many lawyers and lawsuits as it is, Just my 2 cents worth and its overpriced

[Burnt]

I hear ya Ken-Tuk I mostly have made these for friends. But those that I sell have a disclaimer on the invoice that requires a signiture. It basicly says that by recieving the item the purchaser accepts all liability ad responsibility.

With them being fabricated from 1/4 and 3/16 plate they are just a we bit stouter than stockers. I love building them, figuring out all the angles is a blast.

[Eagle Mtn Metal Works]

Hey Burnt
Man those are great looking. What state are you in. I would love to see one for a 07 F250

[Burnt]

Hey Burnt
Man those are great looking. What state are you in. I would love to see one for a 07 F250

I'm in Az, smack between Phoenix in Tucson.

[Eagle Mtn Metal Works]

I kinda thought that desert looked familiar.

[Dennis]

Not being a smart ass here, but looking at your tire mount I would say a little anti-spatter spray would do wonders.. Nice looking bumpers!

[steelfx]

Hey Burnt
Man those are great looking. What state are you in. I would love to see one for a 07 F250

I'm in Az, smack between Phoenix in Tucson.

Incredible Bumpers! Can you make one for my '93 Chev 1/2 Ton? I grew up in Safford, btw...
Great Work!

[Burnt]

Safford a cool town, I have a few friends there, and had a bad experiance at the Pioneer Motel, but that's another story

I just had a guy order two sets of front and rear bumpers for a 96 Bronco, I will post pics as I get them built.

[Burnt]

Here is a few shots from the first one I did, might give you an idea of how it all gets pieced together. With the next ones I went with a thinner piece where the round holes are so I could dimple them. I also wont be using the plastic light buckets anymore because the spray on liner dosent stick to them very well.

[Eagle Mtn Metal Works]

Hey Burnt
Looks like a nice jigsaw puzzle. Very nice job.

[tentonjj]

ill take 2001 ram 1500 bumper please

[glgsales]

I grew up tucson my self!!! We did some off roading in the river beds,when they were dry that is...lol

Those are geat bumpers, and figuring those angles take some brains,or a good software program, which do you have? You must be good at math

Seriously ,nice work there.

Gary

[Burnt]

I grew up tucson my self!!! We did some off roading in the river beds,when they were dry that is...lol

Those are geat bumpers, and figuring those angles take some brains,or a good software program, which do you have? You must be good at math

Seriously ,nice work there.

Gary

Haha... in a "past life" I installed laminate counter tops for a living, some of those get tuff when you have odd angles and have to figure out where there going to finish up after they are cut. I think I can manage these because of that old carpentry experiance.

I built 3 more bumpers this week and am working on a couple more. I will post pics as soon as I have them

Oh and the pic of the silver dodge in the water was at the Glamis Dunes in So Cal. We managed to plan a trip in the middle of a huge storm. Ended up having to move our camp. Who would expect flooding at sand dunes!


There is only about 30 minutes between the first pic and the other two. The storm was actually centered miles to the north of us, only sprinkled where we were.

[glgsales]

We have been there many times, my sister in law has a razor and quads and my son has a long travel. They go there alot!
To bad no duneshere in Minnesota... ;(

Yup the rain can play havoc there pretty fast... so flat nowhere for water go but pool up.


Gary

[DHPmike]

I use my CNC plasma to make bumpers as well. Just did one for a 2006 Dodge rear.

[Burnt]

Knocked out this one for a 96 Bronco today....



Also had to build another set for my own truck, seems like everytime I get a set done someone buys them right off the truck! This is the fourth one I have had on it. Stufed it with a 17500 Lb Winch...

[twicecustom]

woah 17,500lbs,, thats pretty stout.. Bumpers look great!

[calebmoss]

Looks like a road armor

http://roadarmor.com/products/bumpers/2 ... 02500-3500

Those are really nice

[MIFab]

Hey man awesome work! Would you be willing to share your files ?!

[radicalrescue]

how much u charging for the dodge bumper

[Zippo]

sweet