shoe/boot brush

Plasma Cutters can be used to make some amazing products & projects. Upload some pictures of projects you've completed using your plasma cutter.
Post Reply
ggeh
3 Star Elite Contributing Member
3 Star Elite Contributing Member
Posts: 319
Joined: Thu Mar 31, 2016 2:51 pm

shoe/boot brush

Post by ggeh »

My wife is always on me about gravel on my shoes being brought into the house so I came up with this. I found a file posted by oldfolks1 of a foot that I used to create this shoe brush so many thanks to oldfolks1 for the foot-outline.dfx file. The brushes I used are from menards and can be found here https://www.menards.com/main/housewares ... 909&ipos=7 I cut this out of 11 gage but if I make another one Ill use 14 gage because it bends easier .
Attachments
IMG_1960.JPG
IMG_1959 (2).JPG
IMG_1956.JPG
Post Reply

Return to “CNC Plasma Cutter Project Picture Gallery”