It is currently Tue Jun 19, 2018 2:26 pm

 

Jeep/ VW Flower Planters

Plasma Cutters can be used to make some amazing products & projects. Upload some pictures of projects you've completed using your plasma cutter.
User avatar
d2day
Elite Contributing Member
Elite Contributing Member
Posts: 109
Joined: Wed Sep 17, 2014 7:59 pm

Jeep/ VW Flower Planters

Postby d2day » Wed May 30, 2018 12:37 pm

These projects were for my wife, as we all know happy wife happy life...

Jeep Rubicon...plasma cut sides, back and front, welded all the pieces together and painted. Added wheels, axles, and tires for a more realistic look. The fender and side flares were the most difficult part. It is 35" long x 14 inches tall x 14" wide. It might make a good fire pit...if made from heavier metal..... :mrgreen: Note: the tires are actually 6" schedule 40 black pvc pipe, I used the pipe to scale everything up to size so the piece would be correct.

The VW is made from a recycled water tank. Plasma cut windows for the front back and sides, welded in place and painted. The bumpers and wheels were added for realism. It is 23"x 18". The tires on it were rolled from metal and the "mag rims" were plasma cut and welded to the "tires". Hand cut the holes in the tank with plasma, too hard to do with a cutoff wheel.

You do not have access to download this dxf file.
Become a Contributing Member to gain access to the thousands of files shared by our members. Click Here

Mach 3
SheetCam
Corel x5 / Version 12/ Version 7
ArtCam 7.0
CNC Router
ULS Laser
4x4 Plasma Table/Hand Built
HyperTherm PowerMax 45
Cut Shop Software
LCTHC

User avatar
d2day
Elite Contributing Member
Elite Contributing Member
Posts: 109
Joined: Wed Sep 17, 2014 7:59 pm

Re: Jeep/ VW Flower Planters

Postby d2day » Wed May 30, 2018 12:48 pm

With flowers

You do not have access to download this dxf file.
Become a Contributing Member to gain access to the thousands of files shared by our members. Click Here

Mach 3
SheetCam
Corel x5 / Version 12/ Version 7
ArtCam 7.0
CNC Router
ULS Laser
4x4 Plasma Table/Hand Built
HyperTherm PowerMax 45
Cut Shop Software
LCTHC

User avatar
little blue choo
Elite Contributing Member
Elite Contributing Member
Posts: 1437
Joined: Mon Mar 02, 2015 10:38 pm
Location: Cherryville NC
Contact:

Re: Jeep/ VW Flower Planters

Postby little blue choo » Mon Jun 04, 2018 11:04 pm

AWESOME!

Rick
Rick
Arclight 9600 4x8 table
Hypertherm PM65
Acc. Plate Marker, 4 inch Pipe Cutter, Wood Router package
Quincy Q54 compressor 2 stage, 5hp, 60 gal
Refrigerated air dryer & 4 stage filtration system
Software Mach 3, Sheetcam, Solid Edge 2D, Inkscape


Return to “CNC Plasma Cutter Project Picture Gallery”

Who is online

Users browsing this forum: No registered users and 7 guests

Easyscriber engrave attachment for Hypertherm torch's