We are about it move into a bigger stall space at a Makers Fair shop, so I decided to make up a sign to help catch some attention. Is LED back lit so should look even better on the wall and turned on. Opal Perspex behind the logo to help it stand out.
Company sign
-
- 2.5 Star Member
- Posts: 209
- Joined: Mon Jan 13, 2014 10:37 am
- Location: Boronia, Melbourne, Australia
Company sign
Home built 3400 x 1400mm (11 and a bit X a bit over 4.5 feet)
Hypertherm Powermax 45
CandCNC Bladerunner IV
Some air dryer off the internet
Another water seperator I found unused on a shelf
Refrigerated air dryer
Hypertherm Powermax 45
CandCNC Bladerunner IV
Some air dryer off the internet
Another water seperator I found unused on a shelf
Refrigerated air dryer
-
- 2.5 Star Member
- Posts: 209
- Joined: Mon Jan 13, 2014 10:37 am
- Location: Boronia, Melbourne, Australia
Re: Company sign
Not in its final place, but lit up as a test.
Home built 3400 x 1400mm (11 and a bit X a bit over 4.5 feet)
Hypertherm Powermax 45
CandCNC Bladerunner IV
Some air dryer off the internet
Another water seperator I found unused on a shelf
Refrigerated air dryer
Hypertherm Powermax 45
CandCNC Bladerunner IV
Some air dryer off the internet
Another water seperator I found unused on a shelf
Refrigerated air dryer
- Scratch
- 3.5 Star Elite Contributing Member
- Posts: 806
- Joined: Tue Sep 01, 2009 9:07 pm
- Location: Hudson,WI
- Contact:
Re: Company sign
Very nice, are those carriage bolt heads along the edge?
I think I'm the oldest 10 year old boy on the forum...
-
- 2.5 Star Member
- Posts: 209
- Joined: Mon Jan 13, 2014 10:37 am
- Location: Boronia, Melbourne, Australia
Re: Company sign
Thanks Scratch. I made a job to clamp angle iron into the machine so I could plasma the holes. Because why measure each hole, mark it out the use a drill when you could just CAD it and use the expensive machine you spent so long building. Soooooo much quicker and easier.Scratch wrote:Very nice, are those carriage bolt heads along the edge?
Home built 3400 x 1400mm (11 and a bit X a bit over 4.5 feet)
Hypertherm Powermax 45
CandCNC Bladerunner IV
Some air dryer off the internet
Another water seperator I found unused on a shelf
Refrigerated air dryer
Hypertherm Powermax 45
CandCNC Bladerunner IV
Some air dryer off the internet
Another water seperator I found unused on a shelf
Refrigerated air dryer
-
- 3 Star Member
- Posts: 371
- Joined: Mon Sep 10, 2012 8:06 pm
- Location: New Providence, PA
Re: Company sign
Looks great..!! Here is another bolt and screw option if you are ever looking for some old school style hardware. http://www.blacksmithbolt.com/store/c/1 ... crews.aspx
-
- 3 Star Member
- Posts: 345
- Joined: Mon Feb 23, 2015 5:23 pm
- Location: Austin, TX
Re: Company sign
Looks great! Can you take some pictures of back and sides? Looking for more ideas on how to finish the backside for hanging and enclosing LEDs.