It is currently Tue Nov 21, 2017 6:12 pm

 

Backlit Chicago Skyline

Plasma Cutters can be used to make some amazing products & projects. Upload some pictures of projects you've completed using your plasma cutter.
ISUWIZ
Elite Contributing Member
Elite Contributing Member
Posts: 22
Joined: Tue Feb 14, 2017 10:13 am

Backlit Chicago Skyline

Postby ISUWIZ » Mon Aug 14, 2017 1:56 pm

Hello All! Awhile back I posted on the forum for backlighting advice for this project, so I figured I'd share a few pictures. :D

Found a similar design via a google search, and spent a couple hours re-tracing the small, crummy image in Solidworks whilst changing and adding to the image to make it cut well on my machine. You can see where I cut out the tabs for hanging it on the wall before taking the picture.
Chicago cut.jpg


Then bent the flange on the bottom for the LED strip, and bent and welded on the tabs for hanging.
Chicago bent.jpg


Back from powdercoat after only 4hours!!!! Decided on "Satin Black"
chicago powdercoat.jpg


Finished product with lighting installed - Does anybody have any suggestions as to how to keep the led strip from coming back up? The adhesive on this cheap roll I got off of Ebay is GARBAGE. Can I use superglue or something similar?
chicago cyan.jpg


I'd appreciate any feedback! Thanks!
-Calvin

You do not have access to download this dxf file.
Become a Contributing Member to gain access to the thousands of files shared by our members. Click Here


User avatar
little blue choo
Elite Contributing Member
Elite Contributing Member
Posts: 1302
Joined: Mon Mar 02, 2015 10:38 pm
Location: Cherryville NC
Contact:

Re: Backlit Chicago Skyline

Postby little blue choo » Mon Aug 14, 2017 6:09 pm

Looks GREAT Calvin. Keep up the good work.

Rick
Rick
Arclight 9600 4x8 table
Hypertherm PM65
Acc. Plate Marker, 4 inch Pipe Cutter, Wood Router package
Quincy Q54 compressor 2 stage, 5hp, 60 gal
Refrigerated air dryer & 4 stage filtration system
Software Mach 3, Sheetcam, Solid Edge 2D, Inkscape

hemichargersrt8
Elite Contributing Member
Elite Contributing Member
Posts: 167
Joined: Sun Dec 09, 2012 6:31 am

Re: Backlit Chicago Skyline

Postby hemichargersrt8 » Mon Aug 14, 2017 9:47 pm

Well Done!

User avatar
acourtjester
Elite Contributing Member
Elite Contributing Member
Posts: 2795
Joined: Sat Jun 02, 2012 6:04 pm
Location: Pensacola, Fla

Re: Backlit Chicago Skyline

Postby acourtjester » Mon Aug 14, 2017 10:21 pm

I use Goop it is clear and holds like crazy and is flexible you can get it a home depot paint department.
DIY 4X4 Plasma/Router Table
CandCNC DTHC-IV & Feather Touch
Hypertherm PM65 Machine Torch
Drag Knife and Scribe
Miller Mig welder
13" metal lathe
Small Mill
Everlast PM 256 tig

plasmartist
Posts: 39
Joined: Mon Aug 07, 2017 1:31 pm

Re: Backlit Chicago Skyline

Postby plasmartist » Wed Aug 16, 2017 5:55 pm

very creative.


Return to “CNC Plasma Cutter Project Picture Gallery”

Who is online

Users browsing this forum: No registered users and 6 guests