New base drum

Plasma Cutters can be used to make some amazing products & projects. Upload some pictures of projects you've completed using your plasma cutter.
Post Reply
Old Ironworker
2.5 Star Member
2.5 Star Member
Posts: 135
Joined: Tue Mar 05, 2013 1:33 pm
Location: South Haven, Mich.

New base drum

Post by Old Ironworker »

Going out today. To be mounted high on gable eave end of the house. Added solar rope led lights to this 2 layer piece (no power near ). It looked ok with light behind the back plate and second layer ( to the outside ), but not the second layer to inside to the letter. I bet that a 'up-grade' to a better light system will happen down the road.
So, if anyone has had some good luck with solar let me know.
Thanks, Dale.........
Attachments
GEDC0343 (640x480).jpg
GEDC0343 (640x480).jpg (282.17 KiB) Viewed 897 times
bloftin
1/2 Star Member
1/2 Star Member
Posts: 5
Joined: Mon Aug 07, 2017 3:09 pm

Re: New base drum

Post by bloftin »

Hello Old Ironworker

Is the B from a font set or did you free hand it?
It looks very good
Old Ironworker
2.5 Star Member
2.5 Star Member
Posts: 135
Joined: Tue Mar 05, 2013 1:33 pm
Location: South Haven, Mich.

Re: New base drum

Post by Old Ironworker »

Morning,
No, my free hand would be bad. I have a Plasmacam Z-2 system and the letter came from their font list. Did rework it a bit it to fit the piece. I'm waiting on the customer to send some pictures of it installed on the his home. Ran into him at the paint store, said he was changing the colors on it because the house color was too dark. So, the steel dye and steel colors are will be gone. Ha!!!! The customer is always Right. Ok, back to loading up for Blueberry Festival ( So. Haven, MI ).
Have a Good Week Burning !!
Dale.........
Post Reply

Return to “CNC Plasma Cutter Project Picture Gallery”