This file is from Makecnc. I am about to head out to some markets with things to sell and i decided that the stall needed an attention grabber. So a Spinosaurus that is 2.0 meters long and 1.5 meters tall would be just the ticket. I need to give him some extra support in terms of some bent rob welded to legs, back and neck. I may also have to make some rod supports like dinosaur skeletons are supported in museums. He's pretty heavy and i made him from 1.6mm mild steel. Probably should have made the body out of 4mm for extra strength. He will be for sale though and if it sells then the next one will have some extra modifications with 2 extra pieces of "backbone" running along the neck, back and tail to keep it better supported. Work in progress though, i'll post some more pictures when he is all done.
Giant dino
-
- 2.5 Star Member
- Posts: 209
- Joined: Mon Jan 13, 2014 10:37 am
- Location: Boronia, Melbourne, Australia
Giant dino
Home built 3400 x 1400mm (11 and a bit X a bit over 4.5 feet)
Hypertherm Powermax 45
CandCNC Bladerunner IV
Some air dryer off the internet
Another water seperator I found unused on a shelf
Refrigerated air dryer
Hypertherm Powermax 45
CandCNC Bladerunner IV
Some air dryer off the internet
Another water seperator I found unused on a shelf
Refrigerated air dryer
- Capstone
- 4 Star Member
- Posts: 1015
- Joined: Fri Sep 13, 2013 8:42 am
- Location: Washington D.C. Metro
- Contact:
Re: Giant dino
Add more pics when its done too. good luck on the show and sale
Phil
It's all relative...
CNC Metal Design
Instagram CNC Metal Design
JD Squared 4x8
HT PM45, Miller 251 MIG
It's all relative...
CNC Metal Design
Instagram CNC Metal Design
JD Squared 4x8
HT PM45, Miller 251 MIG
-
- 3 Star Elite Contributing Member
- Posts: 445
- Joined: Sat Jul 04, 2015 10:43 pm
Re: Giant dino
Any idea on the weight? It's really cool just not sure how to move it.
Steve
Platform CNC Plasma table
CandCNC Ethercut IV DTHC
Hypertherm 85/CPC/RS485
Miller 350P
Miller Dynasty 280DX
Platform CNC Plasma table
CandCNC Ethercut IV DTHC
Hypertherm 85/CPC/RS485
Miller 350P
Miller Dynasty 280DX
-
- 2.5 Star Member
- Posts: 209
- Joined: Mon Jan 13, 2014 10:37 am
- Location: Boronia, Melbourne, Australia
Re: Giant dino
Not the exact weight. I can lift it on my own, but its bloody awkward. Ill put it i the back of the ute first then pack product around it to transport it to the markets. Hopefully we have some luck and bring in some much needed money.
Home built 3400 x 1400mm (11 and a bit X a bit over 4.5 feet)
Hypertherm Powermax 45
CandCNC Bladerunner IV
Some air dryer off the internet
Another water seperator I found unused on a shelf
Refrigerated air dryer
Hypertherm Powermax 45
CandCNC Bladerunner IV
Some air dryer off the internet
Another water seperator I found unused on a shelf
Refrigerated air dryer