Beam Cover, combining the arts
-
- 3 Star Elite Contributing Member
- Posts: 412
- Joined: Thu Jun 25, 2015 4:06 pm
- Contact:
Beam Cover, combining the arts
Combining the arts of plasma and black smithing!
PlasmaCam DHC2
Hyperthem PM65
Edwards 25T Ironworker
Miller Mig, Tig, Stick & Portable
Why pierce it when you can punch it!
Hyperthem PM65
Edwards 25T Ironworker
Miller Mig, Tig, Stick & Portable
Why pierce it when you can punch it!
-
- 3 Star Member
- Posts: 376
- Joined: Thu May 28, 2015 8:02 am
- Location: Merritt island fl.
Re: Beam Cover, combining the arts
now thats sweet...i like that
-
- 3 Star Elite Contributing Member
- Posts: 412
- Joined: Thu Jun 25, 2015 4:06 pm
- Contact:
Re: Beam Cover, combining the arts
Thanks!
Grapes are made from ball bearings (seconds). Animals have magnets on them so the owner can move them around wherever they want on the side plates.
Grapes are made from ball bearings (seconds). Animals have magnets on them so the owner can move them around wherever they want on the side plates.
PlasmaCam DHC2
Hyperthem PM65
Edwards 25T Ironworker
Miller Mig, Tig, Stick & Portable
Why pierce it when you can punch it!
Hyperthem PM65
Edwards 25T Ironworker
Miller Mig, Tig, Stick & Portable
Why pierce it when you can punch it!
- rdj357
- 4 Star Elite Contributing Member
- Posts: 1168
- Joined: Sun Mar 11, 2012 4:40 pm
- Location: Tahlequah, OK
- Contact:
Re: Beam Cover, combining the arts
Very nice work!!
Robert Johnson
----- PlasmaCam 5x10 Table -----
FourNinety Creations & Learn PC, LLC
Plasmacam Goodies! Snap'NCut Mount, AXXON Cards/Cables, Maintenance Items
Learn Plasmacam Workshops
Learn Plasmacam on Facebook
Learn Plasmacam on YouTube
----- PlasmaCam 5x10 Table -----
FourNinety Creations & Learn PC, LLC
Plasmacam Goodies! Snap'NCut Mount, AXXON Cards/Cables, Maintenance Items
Learn Plasmacam Workshops
Learn Plasmacam on Facebook
Learn Plasmacam on YouTube
- Nacs Fab
- 3 Star Member
- Posts: 328
- Joined: Tue Dec 04, 2012 4:11 pm
- Location: Columbia, MO
Re: Beam Cover, combining the arts
That is WAY Cool!
Shop Droids Plasmabot 3.0 DIY 4x8 with water table
G540 with LCTHC by candcnc
Hypertherm 1250 with Duramax Torch Upgrade
all built... by me...
G540 with LCTHC by candcnc
Hypertherm 1250 with Duramax Torch Upgrade
all built... by me...
- Capstone
- 4 Star Member
- Posts: 1015
- Joined: Fri Sep 13, 2013 8:42 am
- Location: Washington D.C. Metro
- Contact:
Re: Beam Cover, combining the arts
You'll have to post pics of the piece installed. I think I know what this does, but it's hard to visualize. either way, the art/fab is very good.
Phil
It's all relative...
CNC Metal Design
Instagram CNC Metal Design
JD Squared 4x8
HT PM45, Miller 251 MIG
It's all relative...
CNC Metal Design
Instagram CNC Metal Design
JD Squared 4x8
HT PM45, Miller 251 MIG
-
- 3 Star Elite Contributing Member
- Posts: 412
- Joined: Thu Jun 25, 2015 4:06 pm
- Contact:
Re: Beam Cover, combining the arts
Should have thought about that!
Here it is installed.
Here it is installed.
- Attachments
-
- image.jpeg (42.23 KiB) Viewed 1763 times
PlasmaCam DHC2
Hyperthem PM65
Edwards 25T Ironworker
Miller Mig, Tig, Stick & Portable
Why pierce it when you can punch it!
Hyperthem PM65
Edwards 25T Ironworker
Miller Mig, Tig, Stick & Portable
Why pierce it when you can punch it!
-
- 2 Star Member
- Posts: 72
- Joined: Sat Dec 13, 2008 10:26 am
- Location: Nichols, SC
- Contact:
Re: Beam Cover, combining the arts
great work! what is the finish on the ironwork?
There is plenty of room at the top - and the top is where you want to be. Whenever you do a project - do the hardest part first and the rest will be easy.
- Capstone
- 4 Star Member
- Posts: 1015
- Joined: Fri Sep 13, 2013 8:42 am
- Location: Washington D.C. Metro
- Contact:
Re: Beam Cover, combining the arts
So the bolts are all just for show pretty much other than holding the piece up. They aren't actually structural.Bobcat320 wrote:Should have thought about that!
Here it is installed.
Very nice touch and idea. Thanks for sharing!
Phil
It's all relative...
CNC Metal Design
Instagram CNC Metal Design
JD Squared 4x8
HT PM45, Miller 251 MIG
It's all relative...
CNC Metal Design
Instagram CNC Metal Design
JD Squared 4x8
HT PM45, Miller 251 MIG
-
- 3 Star Elite Contributing Member
- Posts: 412
- Joined: Thu Jun 25, 2015 4:06 pm
- Contact:
Re: Beam Cover, combining the arts
The main body is black wrinkle powder coat. The grapes, leaves and animals are Sculpt Noveau brown patina.anvilhead wrote:great work! what is the finish on the ironwork?
PlasmaCam DHC2
Hyperthem PM65
Edwards 25T Ironworker
Miller Mig, Tig, Stick & Portable
Why pierce it when you can punch it!
Hyperthem PM65
Edwards 25T Ironworker
Miller Mig, Tig, Stick & Portable
Why pierce it when you can punch it!
-
- 3 Star Elite Contributing Member
- Posts: 412
- Joined: Thu Jun 25, 2015 4:06 pm
- Contact:
Re: Beam Cover, combining the arts
Correct Capstone - just decorative. The main beams in the house are steel I-beams that were boxed in with wood. So 8 of the fake bolt heads have counter-sunk holes in them and then just black sheet rock screws to attach it to the wood.Capstone wrote:So the bolts are all just for show pretty much other than holding the piece up. They aren't actually structural.Bobcat320 wrote:Should have thought about that!
Here it is installed.
Very nice touch and idea. Thanks for sharing!
PlasmaCam DHC2
Hyperthem PM65
Edwards 25T Ironworker
Miller Mig, Tig, Stick & Portable
Why pierce it when you can punch it!
Hyperthem PM65
Edwards 25T Ironworker
Miller Mig, Tig, Stick & Portable
Why pierce it when you can punch it!
- Nacs Fab
- 3 Star Member
- Posts: 328
- Joined: Tue Dec 04, 2012 4:11 pm
- Location: Columbia, MO
Re: Beam Cover, combining the arts
Where did you source the rivets for this? I have a project perfect for that style. Thanks!
Shop Droids Plasmabot 3.0 DIY 4x8 with water table
G540 with LCTHC by candcnc
Hypertherm 1250 with Duramax Torch Upgrade
all built... by me...
G540 with LCTHC by candcnc
Hypertherm 1250 with Duramax Torch Upgrade
all built... by me...
-
- 3 Star Elite Contributing Member
- Posts: 412
- Joined: Thu Jun 25, 2015 4:06 pm
- Contact:
Re: Beam Cover, combining the arts
Piehtoolco.comNacs Fab wrote:Where did you source the rivets for this? I have a project perfect for that style. Thanks!
They have a huge selection of rivets - brass, copper, steel and any size you can imagine.
Great people as well!
PlasmaCam DHC2
Hyperthem PM65
Edwards 25T Ironworker
Miller Mig, Tig, Stick & Portable
Why pierce it when you can punch it!
Hyperthem PM65
Edwards 25T Ironworker
Miller Mig, Tig, Stick & Portable
Why pierce it when you can punch it!
-
- 4 Star Member
- Posts: 1008
- Joined: Mon May 21, 2012 3:58 pm
- Location: spanaway wa.
Re: Beam Cover, combining the arts
Nice work!!
Jim
Jim