New DIY table
-
- 1.5 Star Member
- Posts: 42
- Joined: Mon Jul 13, 2015 6:55 pm
New DIY table
Just finished my 4x8 DIY table, made a couple test cuts over the weekend, still a lot to learn
-
- 3 Star Elite Contributing Member
- Posts: 287
- Joined: Wed Aug 27, 2014 12:03 pm
- Location: Shiner
Re: New DIY table
well lets see what you have been working on.
Samson 5x10
Designedge software
Hypertherm Powermax 65
Hypertherm powermax 380
Thermodynamics cut master 85
Jet 4' box & pan break
Eastwood Powder coating guns.
Designedge software
Hypertherm Powermax 65
Hypertherm powermax 380
Thermodynamics cut master 85
Jet 4' box & pan break
Eastwood Powder coating guns.
-
- 1.5 Star Member
- Posts: 42
- Joined: Mon Jul 13, 2015 6:55 pm
Re: New DIY table
More pics of weekend cuts
- Attachments
-
- image.jpg (28.42 KiB) Viewed 2245 times
-
- image.jpg (32.47 KiB) Viewed 2245 times
-
- image.jpg (24.44 KiB) Viewed 2245 times
-
- 2 Star Elite Contributing Member
- Posts: 92
- Joined: Wed Aug 19, 2009 8:30 pm
Re: New DIY table
lets see the table
-
- 1 Star Member
- Posts: 22
- Joined: Mon Sep 14, 2015 4:46 pm
Re: New DIY table
what plans did you use?
- acourtjester
- 6 Star Elite Contributing Member
- Posts: 7792
- Joined: Sat Jun 02, 2012 6:04 pm
- Location: Pensacola, Fla
Re: New DIY table
DIY strikes again Very cool
Looks like simple cut rule additions for the dimples on start and finish line cuts.
this may help and there are other posts about this on here.
http://www.plasmaspider.com/viewtopic.p ... es#p103839
Looks like simple cut rule additions for the dimples on start and finish line cuts.
this may help and there are other posts about this on here.
http://www.plasmaspider.com/viewtopic.p ... es#p103839
DIY 4X4 Plasma/Router Table
Hypertherm PM65 Machine Torch
Drag Knife and Scribe
Miller Mig welder
13" metal lathe
Small Mill
Everlast PowerTig 255 EXT
Hypertherm PM65 Machine Torch
Drag Knife and Scribe
Miller Mig welder
13" metal lathe
Small Mill
Everlast PowerTig 255 EXT