We all start somewhere right?
-
- 2 Star Member
- Posts: 64
- Joined: Fri Oct 10, 2014 10:04 am
- Location: Goose Creek SC
We all start somewhere right?
Our class has had our set up since 9/14. I'm a teacher just a few steps ahead of my students. At a students request I'm posting his project. (they see me reading the forum during lunch) Modified piece he's calling brushpile, not a bad start for a 16 year old. He since cleaned up the file so if anyone wants it feel free to send me a message.
-
- 2 Star Member
- Posts: 64
- Joined: Fri Oct 10, 2014 10:04 am
- Location: Goose Creek SC
Re: We all start somewhere right?
BTW this piece is just the size of a sheet of paper
- ben de lappe
- 4 Star Elite Contributing Member
- Posts: 1234
- Joined: Mon Aug 03, 2009 9:37 am
- Location: North Mississippi
Re: We all start somewhere right?
Hey, that's a great start. No larger than a piece of paper no less, cut without losing detail and by all appearances cut well. Twigs can be difficult. Excellent job young man!
- levesquea
- 2.5 Star Member
- Posts: 118
- Joined: Wed Jul 27, 2011 7:02 pm
- Location: Harrington, Quebec, Canada
Re: We all start somewhere right?
Congratulations young man. It is indeed a great start for your first piece.
Glad to see young teenagers learning new ways to express their creativity.
Keep up the good work.
Andre
Glad to see young teenagers learning new ways to express their creativity.
Keep up the good work.
Andre
Plasmacam 4x4
Hypertherm Powermax 45
Everlast power Tig 255
Affinity Designer
Alibre expert
Vectric Aspire 10
Hypertherm Powermax 45
Everlast power Tig 255
Affinity Designer
Alibre expert
Vectric Aspire 10
-
- 2 Star Member
- Posts: 64
- Joined: Fri Oct 10, 2014 10:04 am
- Location: Goose Creek SC
Re: We all start somewhere right?
It's not letting me send files with .dxf extensions via message so I am trying to post it here.
- Attachments
-
- brush pile.dxf
- (283.65 KiB) Downloaded 276 times
- ben de lappe
- 4 Star Elite Contributing Member
- Posts: 1234
- Joined: Mon Aug 03, 2009 9:37 am
- Location: North Mississippi
-
- 4 Star Member
- Posts: 1472
- Joined: Wed Feb 04, 2009 5:35 pm
Re: We all start somewhere right?
Great fist up effort and thanks for taking the the time to go beyond the class room with your students. They might not say thank you at the the time but I'm sure they appreciate it and will look back at it in time with a positive attitude.
Murray
Murray
- chasxjs
- 2.5 Star Elite Contributing Member
- Posts: 225
- Joined: Sun Aug 24, 2014 10:50 pm
- Location: Lake Havasu City, Arizona
Re: We all start somewhere right?
Great job.
Charles
____________________
DIY 5x5 Folding Plasma Table
Hypertherm PM45
Lagun 4 axis CNC Mill
Shopsmith Lathe
Multiple saws, welders, etc.
____________________
DIY 5x5 Folding Plasma Table
Hypertherm PM45
Lagun 4 axis CNC Mill
Shopsmith Lathe
Multiple saws, welders, etc.
- acourtjester
- 6 Star Elite Contributing Member
- Posts: 7792
- Joined: Sat Jun 02, 2012 6:04 pm
- Location: Pensacola, Fla
Re: We all start somewhere right?
Thanks keep the young minds going
Its great to pass the torch
Its great to pass the torch
DIY 4X4 Plasma/Router Table
Hypertherm PM65 Machine Torch
Drag Knife and Scribe
Miller Mig welder
13" metal lathe
Small Mill
Everlast PowerTig 255 EXT
Hypertherm PM65 Machine Torch
Drag Knife and Scribe
Miller Mig welder
13" metal lathe
Small Mill
Everlast PowerTig 255 EXT
- tnbndr
- 4.5 Star Elite Contributing Member
- Posts: 1670
- Joined: Mon Jan 09, 2012 4:30 pm
- Location: New Berlin, WI
- Contact:
Re: We all start somewhere right?
Very nice job, He is on his way to a great career or hobby.
Dennis
LDR 4x8, Scribe, DTHCIV
Hypertherm PM45, Macair Dryer
DeVilbiss Air America 6.5HP, 80Gal., 175psi, Two Stage
16.9scfm@100psi, 16.0scfm@175psi
Miller 215 MultiMatic
RW 390E Slip Roll (Powered)
AutoCAD, SheetCAM, Mach 3
http://ikescreations.com
LDR 4x8, Scribe, DTHCIV
Hypertherm PM45, Macair Dryer
DeVilbiss Air America 6.5HP, 80Gal., 175psi, Two Stage
16.9scfm@100psi, 16.0scfm@175psi
Miller 215 MultiMatic
RW 390E Slip Roll (Powered)
AutoCAD, SheetCAM, Mach 3
http://ikescreations.com
-
- 2 Star Elite Contributing Member
- Posts: 86
- Joined: Wed Jul 13, 2011 6:15 pm
- Buzzard Gut
- 3 Star Member
- Posts: 364
- Joined: Mon Jun 27, 2011 2:07 pm
- Location: Coos Bay Oregon
Re: We all start somewhere right?
For being a Teacher I would say your doing your job vary well !! great job to both of ya.
Bob
Bob
The older I get, The better it was!
-
- 2 Star Member
- Posts: 64
- Joined: Fri Oct 10, 2014 10:04 am
- Location: Goose Creek SC
Re: We all start somewhere right?
I'd like to thank everyone for their encouraging comments. The student is quite pleased with himself. I am sure we will post more in the future.
-
- 2.5 Star Elite Contributing Member
- Posts: 175
- Joined: Thu Jun 27, 2013 6:37 am
Re: We all start somewhere right?
nice work,very impressive
-
- 2.5 Star Member
- Posts: 111
- Joined: Fri Aug 08, 2014 8:00 am
Re: We all start somewhere right?
I like it! I wish we had a class like yours when I was in high school!
Tell him great job! I look forward to seeing more
Thanks for the file, I think my brother would like this in his house!
Tell him great job! I look forward to seeing more
Thanks for the file, I think my brother would like this in his house!
http://www.facebook.com/WinterFabrication
Matt
CandCNC Ethercut
Precision Plasma Gantry
Hypertherm Powermax 45
Matt
CandCNC Ethercut
Precision Plasma Gantry
Hypertherm Powermax 45
-
- 4 Star Member
- Posts: 950
- Joined: Thu Jan 02, 2014 6:33 pm
Re: We all start somewhere right?
That's cool. He should put it in a fish tank.
Torchmate 2x2 - Flashcut
Powermax 45 - Machine torch
Taig CNC Mill - Flashcut
Razorweld Distributor
Powermax 45 - Machine torch
Taig CNC Mill - Flashcut
Razorweld Distributor
-
- 2.5 Star Member
- Posts: 142
- Joined: Wed Jun 18, 2014 11:06 am
- Location: Newberry SC
- Contact:
Re: We all start somewhere right?
Hey, I love that design. I did one years ago and have attached it to this post it sells very well.................Keep up the great work I can't believe it's cut so small very impressive!!!!!
- Craig
- 3.5 Star Member
- Posts: 628
- Joined: Mon Dec 24, 2012 3:43 pm
Re: We all start somewhere right?
Great starter piece, I look forward to your next one. Craig
Craig Johnson
-
- 3.5 Star Member
- Posts: 566
- Joined: Wed Sep 19, 2012 6:43 am
Re: We all start somewhere right?
I love it, but even though not very big, the whole thing being supported by those two thin sections just scares me...lol
Great job though!
Great job though!
-
- 3 Star Elite Contributing Member
- Posts: 356
- Joined: Sun Jan 22, 2012 5:39 pm
Re: We all start somewhere right?
Looks a ton better than my first draw and cut. Nice job!!
K D Metal Werks
PlasmaCam DHC2
Hypertherm Power Max 45
Hobart Handler 190 Mig
Niagara 3"x 36" Slip Roll 14ga
Driess/ Krumph 4' box & pan brake 16ga
Hossfeld #2 Bender Ridgid 700 threader
Pexto 137-1 16ga. Stomp Shear
MADE IN USA
PlasmaCam DHC2
Hypertherm Power Max 45
Hobart Handler 190 Mig
Niagara 3"x 36" Slip Roll 14ga
Driess/ Krumph 4' box & pan brake 16ga
Hossfeld #2 Bender Ridgid 700 threader
Pexto 137-1 16ga. Stomp Shear
MADE IN USA
-
- 3 Star Member
- Posts: 376
- Joined: Thu May 28, 2015 8:02 am
- Location: Merritt island fl.
Re: We all start somewhere right?
i wish we had these kind of tools in school when i was in school i am trying to get my step son interested but ....not much luck well keep up the nice work we will be keeping a i open for more work from him.
-
- 3 Star Member
- Posts: 490
- Joined: Fri Feb 10, 2012 5:13 pm
- Location: Cheyenne, WY
Re: We all start somewhere right?
Very talented student. Keep challenging them! They will go far!
-
- 2.5 Star Member
- Posts: 170
- Joined: Wed Nov 20, 2013 10:34 am
- Location: Louisiana
Re: We all start somewhere right?
great job for you and your student - thanks for the file
- Zippo
- 4.5 Star Elite Contributing Member
- Posts: 1709
- Joined: Fri Mar 04, 2011 12:49 pm
- Location: Minnesota Based
Re: We all start somewhere right?
nice job