It is currently Sun May 27, 2018 12:54 am

 

Company sign

Plasma Cutters can be used to make some amazing products & projects. Upload some pictures of projects you've completed using your plasma cutter.
BensPlasmaAu
Posts: 195
Joined: Mon Jan 13, 2014 10:37 am
Location: Boronia, Melbourne, Australia

Company sign

Postby BensPlasmaAu » Fri Feb 23, 2018 9:41 pm

We are about it move into a bigger stall space at a Makers Fair shop, so I decided to make up a sign to help catch some attention. Is LED back lit so should look even better on the wall and turned on. Opal Perspex behind the logo to help it stand out.

042C1285-ADEE-46D7-973A-70EBA9529A61.jpeg

D1E8DFB5-30DB-4458-A863-286CEE75D00C.jpeg

You do not have access to download this dxf file.
Become a Contributing Member to gain access to the thousands of files shared by our members. Click Here

Home built 3400 x 1400mm (11 and a bit X a bit over 4.5 feet)
Hypertherm Powermax 45
CandCNC Bladerunner IV
Some air dryer off the internet
Another water seperator I found unused on a shelf
Refrigerated air dryer

BensPlasmaAu
Posts: 195
Joined: Mon Jan 13, 2014 10:37 am
Location: Boronia, Melbourne, Australia

Re: Company sign

Postby BensPlasmaAu » Sat Feb 24, 2018 12:09 am

Not in its final place, but lit up as a test.

2B462DF5-70E8-4575-BBBD-3A3E46495136.jpeg

You do not have access to download this dxf file.
Become a Contributing Member to gain access to the thousands of files shared by our members. Click Here

Home built 3400 x 1400mm (11 and a bit X a bit over 4.5 feet)
Hypertherm Powermax 45
CandCNC Bladerunner IV
Some air dryer off the internet
Another water seperator I found unused on a shelf
Refrigerated air dryer

User avatar
Scratch
Elite Contributing Member
Elite Contributing Member
Posts: 471
Joined: Tue Sep 01, 2009 9:07 pm
Location: Hudson,WI
Contact:

Re: Company sign

Postby Scratch » Sat Feb 24, 2018 10:22 am

Very nice, are those carriage bolt heads along the edge?
I think I'm the oldest 10 year old boy on the forum...

BensPlasmaAu
Posts: 195
Joined: Mon Jan 13, 2014 10:37 am
Location: Boronia, Melbourne, Australia

Re: Company sign

Postby BensPlasmaAu » Sat Feb 24, 2018 6:17 pm

Scratch wrote:Very nice, are those carriage bolt heads along the edge?


Thanks Scratch. I made a job to clamp angle iron into the machine so I could plasma the holes. Because why measure each hole, mark it out the use a drill when you could just CAD it and use the expensive machine you spent so long building. Soooooo much quicker and easier.
Home built 3400 x 1400mm (11 and a bit X a bit over 4.5 feet)
Hypertherm Powermax 45
CandCNC Bladerunner IV
Some air dryer off the internet
Another water seperator I found unused on a shelf
Refrigerated air dryer

bhamer62
Elite Contributing Member
Elite Contributing Member
Posts: 291
Joined: Mon Sep 10, 2012 8:06 pm
Location: Columbia, PA
Contact:

Re: Company sign

Postby bhamer62 » Mon Feb 26, 2018 1:42 pm

Looks great..!! Here is another bolt and screw option if you are ever looking for some old school style hardware. http://www.blacksmithbolt.com/store/c/1 ... crews.aspx

whiskeymike
Posts: 304
Joined: Mon Feb 23, 2015 5:23 pm
Location: Austin, TX

Re: Company sign

Postby whiskeymike » Tue Mar 13, 2018 1:39 am

Looks great! Can you take some pictures of back and sides? Looking for more ideas on how to finish the backside for hanging and enclosing LEDs.


Return to “CNC Plasma Cutter Project Picture Gallery”

Who is online

Users browsing this forum: No registered users and 4 guests

Easyscriber engrave attachment for Hypertherm torch's