Question on plasma cutter amps

CommandCNC related questions, tips and topics can be posted here
Post Reply
Othog
1.5 Star Member
1.5 Star Member
Posts: 31
Joined: Wed Apr 12, 2017 10:25 am

Question on plasma cutter amps

Post by Othog »

When you choose the 45 amp setting for a cut does the program change the amps from 65 to 45, or do you need to do it manually, I am using a Hyperthermia 65
sphurley
3 Star Elite Contributing Member
3 Star Elite Contributing Member
Posts: 445
Joined: Sat Jul 04, 2015 10:43 pm

Re: Question on plasma cutter amps

Post by sphurley »

Unless you are using CandCNC's systems HyT option and the RS485 remote option in the PM65, you have to change it manually.
Steve
Platform CNC Plasma table
CandCNC Ethercut IV DTHC
Hypertherm 85/CPC/RS485
Miller 350P
Miller Dynasty 280DX
Othog
1.5 Star Member
1.5 Star Member
Posts: 31
Joined: Wed Apr 12, 2017 10:25 am

Re: Question on plasma cutter amps

Post by Othog »

Will it show a change on the digital read out on the plasma?
tcaudle
4 Star Elite Contributing Member
4 Star Elite Contributing Member
Posts: 1352
Joined: Tue Feb 28, 2012 6:47 pm

Re: Question on plasma cutter amps

Post by tcaudle »

Othog wrote:Will it show a change on the digital read out on the plasma?
Only of you have th Hyt_Connect options (RS485 on your plasma and in CommandCNC.
Post Reply

Return to “C&CNC CommandCNC”