It is currently Sat Sep 22, 2018 7:23 am

 

Cutting Corrugated steel HELP

CommandCNC related questions and tips can be posted to this topic.
KMcCurdy
Posts: 3
Joined: Fri Feb 02, 2018 10:18 pm

Cutting Corrugated steel HELP

Postby KMcCurdy » Sat Apr 28, 2018 9:54 pm

I have searched and have only found one post about this, but it was for Mach3. I have a 4x8 Arclight Dynamics table with a Hypertherm 45. I am running Sheetcam and CommandCNC for software. I want to cut some letters out of corrugated metal and have no idea how to make the THC follow the curves of the metal. Any advised would be appreciated. Thanks

User avatar
tnbndr
Elite Contributing Member
Elite Contributing Member
Posts: 1411
Joined: Mon Jan 09, 2012 4:30 pm
Location: New Berlin, WI
Contact:

Re: Cutting Corrugated steel HELP

Postby tnbndr » Sun Apr 29, 2018 9:02 am

I would contact Arclight. I think there are settings in the SheetCam or Mach3 that need to be changed to speed up the response of the THC.
Dennis
LDR 4x8, Scribe, DTHCIV
PM45
DeVilbiss Air America 6.5HP, 80Gal., 175psi, Two Stage
[email protected], [email protected]
Miller 211
RW 390E Slip Roll
AutoCAD, SheetCAM, Mach 3
https://www.facebook.com/ikescreations?ref=hl
http://ikescreations.com

motoguy
Elite Contributing Member
Elite Contributing Member
Posts: 1073
Joined: Tue Aug 25, 2015 12:05 pm
Location: Central MO, USA

Re: Cutting Corrugated steel HELP

Postby motoguy » Sun Apr 29, 2018 9:50 am

Bulltear 6x12 w/ Proton Z axis & watertable
CommandCNC/Linux w/ Ohmic & HyT options
Hypertherm Powermax 85 w/ machine torch
Solidworks, Coreldraw X7, Inkscape, Sheetcam


Return to “CommandCNC - Linux”

Who is online

Users browsing this forum: No registered users and 2 guests

Easyscriber engrave attachment for Hypertherm torch's