Is CandCNC's site down or is it just me?

CandCNC plasma table components discussion forum
Post Reply
User avatar
djreiswig
4.5 Star Elite Contributing Member
4.5 Star Elite Contributing Member
Posts: 1924
Joined: Thu Nov 19, 2015 10:02 pm
Location: SE Nebraska

Is CandCNC's site down or is it just me?

Post by djreiswig »

Wondering if they got hit by the hurricane?
2014 Bulltear (StarLab) 4x8
C&CNC EtherCut
Mach3, SheetCam, Draftsight
Hypertherm PM65
Oxy/Acetylene Flame Torch
Pneumatic Plate Marker, Ohmic, 10 inch Rotary Chuck (in progress)
User avatar
acourtjester
6 Star Elite Contributing Member
6 Star Elite Contributing Member
Posts: 7754
Joined: Sat Jun 02, 2012 6:04 pm
Location: Pensacola, Fla

Re: Is CandCNC's site down or is it just me?

Post by acourtjester »

NO the site is working they are near Dallas to the Northeast (Whitewright,Tx)
https://www.candcnc.com/
DIY 4X4 Plasma/Router Table
Hypertherm PM65 Machine Torch
Drag Knife and Scribe
Miller Mig welder
13" metal lathe
Small Mill
Everlast PowerTig 255 EXT
User avatar
djreiswig
4.5 Star Elite Contributing Member
4.5 Star Elite Contributing Member
Posts: 1924
Joined: Thu Nov 19, 2015 10:02 pm
Location: SE Nebraska

Re: Is CandCNC's site down or is it just me?

Post by djreiswig »

Thanks for checking. I still can't get there. It must be something with my internet.
2014 Bulltear (StarLab) 4x8
C&CNC EtherCut
Mach3, SheetCam, Draftsight
Hypertherm PM65
Oxy/Acetylene Flame Torch
Pneumatic Plate Marker, Ohmic, 10 inch Rotary Chuck (in progress)
User avatar
djreiswig
4.5 Star Elite Contributing Member
4.5 Star Elite Contributing Member
Posts: 1924
Joined: Thu Nov 19, 2015 10:02 pm
Location: SE Nebraska

Re: Is CandCNC's site down or is it just me?

Post by djreiswig »

It's working for me now. Must have been my connection.
2014 Bulltear (StarLab) 4x8
C&CNC EtherCut
Mach3, SheetCam, Draftsight
Hypertherm PM65
Oxy/Acetylene Flame Torch
Pneumatic Plate Marker, Ohmic, 10 inch Rotary Chuck (in progress)
tcaudle
4 Star Elite Contributing Member
4 Star Elite Contributing Member
Posts: 1352
Joined: Tue Feb 28, 2012 6:47 pm

Re: Is CandCNC's site down or is it just me?

Post by tcaudle »

Our ISP got hit last week with a DDS attack and the response slowed to a crawl for several hours and our site was affected and you would get server time outs but we have not had any reports since then and we watch it pretty close. My email got delayed by 24 hrs too :(
Post Reply

Return to “CandCNC Forum”