It is currently Fri Dec 15, 2017 3:18 am

 

CandCNC Control Box

CandCNC plasma table components discussion forum
KIDTech
Elite Contributing Member
Elite Contributing Member
Posts: 360
Joined: Tue Oct 28, 2014 1:21 pm

CandCNC Control Box

Postby KIDTech » Wed May 11, 2016 10:24 am

When I am done for the day should I just shut the motors down on the control box using the front faceplate or should I flip the switch on the bottom of the box to kill the power? Any help is appreciated.
DIY 5x10 v rail, rack and pinion
Gecko g540
Pm65 - aka game changer
Longevity ForceCut 42i is sitting on the shelf
Proma THC
ACAD, SheetCam, Mach3
Millermatic 211
NEW HORSE IN THE STABLE:
4'x8' LDR downdraft w/a scribe
Milltronics Partner 2 CNC mill

motoguy
Posts: 931
Joined: Tue Aug 25, 2015 12:05 pm
Location: Central MO, USA

Re: CandCNC Control Box

Postby motoguy » Wed May 11, 2016 10:49 am

Press the red button on the faceplate. You'll see the yellow "dump" light come on for a few moments. When the yellow light goes out, and it's only the red light, then flip the switch.
Bulltear 6x12 w/ Proton Z axis & watertable
CommandCNC/Linux w/ Ohmic & HyT options
Hypertherm Powermax 85 w/ machine torch
Solidworks, Coreldraw X7, Inkscape, Sheetcam

tcaudle
Posts: 813
Joined: Tue Feb 28, 2012 6:47 pm

Re: CandCNC Control Box

Postby tcaudle » Thu May 12, 2016 7:45 pm

Its basically in standby with the motor power off, If your area is prone to electrical storms I would power down completely. You need to power up the PC first then the main box. Surge protectors just stop arcing. They won't save electronics from even a moderate line surge.

WSS
Posts: 437
Joined: Wed Sep 29, 2010 12:19 am

Re: CandCNC Control Box

Postby WSS » Mon Sep 26, 2016 2:32 am

I have an older system (PlazPak 4+) that we completely disconnect when not cutting. Once computers are shut down, we de-energize a two pole relay and ALL power breaks from all elements of the table. This includes a oxy/fuel console, I/O control box, CandCnc controller, computer, air solenoids, air cooler for compressor and fans.

We have been running this table for probably five years in a work environment (four to five hours a day) with ZERO issues.


Return to “CandCNC”

Who is online

Users browsing this forum: No registered users and 1 guest