Miller vs Lincoln

Discussion forum for Lincoln & Miller plasma cutters
Post Reply
cbassjr
3 Star Member
3 Star Member
Posts: 307
Joined: Fri Dec 21, 2012 5:21 pm

Miller vs Lincoln

Post by cbassjr »

Am looking at the miller 225 and the lincoln 250 gxt. I know a lot of you have a lot more experience in this area so even though I'm leaning toward the lincoln I'd like to know you info on the miller 350. I've had a miller before but started having arc issues with it so I got rid of it about 5 years ago and bought a hobart. The only problem I'm having is my new miller suitcase might requires cc/c and the hobart doesn't have that.
User avatar
tnbndr
4.5 Star Elite Contributing Member
4.5 Star Elite Contributing Member
Posts: 1668
Joined: Mon Jan 09, 2012 4:30 pm
Location: New Berlin, WI
Contact:

Re: Miller vs Lincoln

Post by tnbndr »

I would ask that question here, http://weldingweb.com/forum.php, or do some searching there. I'm sure you will completely confuse yourself. Most times it is personal preferance or experience. Since you say you have a Miller suitcase, why not stick with Miller?
Dennis
LDR 4x8, Scribe, DTHCIV
Hypertherm PM45, Macair Dryer
DeVilbiss Air America 6.5HP, 80Gal., 175psi, Two Stage
16.9scfm@100psi, 16.0scfm@175psi
Miller 215 MultiMatic
RW 390E Slip Roll (Powered)
AutoCAD, SheetCAM, Mach 3
http://ikescreations.com
Post Reply

Return to “Lincoln & Miller Plasma Cutters”