torch not fireing every move
-
- 1.5 Star Member
- Posts: 39
- Joined: Sun Apr 08, 2012 5:25 pm
- Location: Belchertown, Mass
- Contact:
torch not fireing every move
ok folks here is my delema we have a torchmate 2x4 when we import or draw our own pattern and go to cut it out the torch some times dosent fire some times it does , when it dosent fire if you hit a key and stop the program then hit restart it fires , is it a torch problem ? we have changed tips and caps changed torch height to no avail or is it something we are or arnt doing in torchmate cad lite any help would bbe great im going nuts trying to figure it out we do not have auto height control thanks in advance
-
- 5 Star Elite Contributing Member
- Posts: 3087
- Joined: Mon Jul 20, 2009 11:18 pm
- Location: North Carolina
Re: torch not fireing every move
What is the make and model plasma? When it doesn't fire.....do you see any spark out of the torch at all?
Jim Colt
Jim Colt
-
- 1.5 Star Member
- Posts: 39
- Joined: Sun Apr 08, 2012 5:25 pm
- Location: Belchertown, Mass
- Contact:
Re: torch not fireing every move
i have two cutters one everlast one chacogo tool and no no spark the air clicks on but no torch fire if i stop the program by hitting any key then hit start it starts to cut not sure whats up wether we clicked some setting or if it may be the swirl rings or what any help wwould be great
-
- 1/2 Star Member
- Posts: 6
- Joined: Tue Sep 04, 2012 6:01 pm
Re: torch not fireing every move
CHECK YOUR GROUND AND YOUR EARTH GROUND...