torch not fireing every move

Discussion forum for RazorWeld, Everlast, and all other plasma cutters.
Post Reply
bigbear
1.5 Star Member
1.5 Star Member
Posts: 39
Joined: Sun Apr 08, 2012 5:25 pm
Location: Belchertown, Mass
Contact:

torch not fireing every move

Post by bigbear »

ok folks here is my delema we have a torchmate 2x4 when we import or draw our own pattern and go to cut it out the torch some times dosent fire some times it does , when it dosent fire if you hit a key and stop the program then hit restart it fires , is it a torch problem ? we have changed tips and caps changed torch height to no avail or is it something we are or arnt doing in torchmate cad lite any help would bbe great im going nuts trying to figure it out we do not have auto height control thanks in advance
jimcolt
5 Star Elite Contributing Member
5 Star Elite Contributing Member
Posts: 3086
Joined: Mon Jul 20, 2009 11:18 pm
Location: North Carolina

Re: torch not fireing every move

Post by jimcolt »

What is the make and model plasma? When it doesn't fire.....do you see any spark out of the torch at all?

Jim Colt
bigbear
1.5 Star Member
1.5 Star Member
Posts: 39
Joined: Sun Apr 08, 2012 5:25 pm
Location: Belchertown, Mass
Contact:

Re: torch not fireing every move

Post by bigbear »

i have two cutters one everlast one chacogo tool and no no spark the air clicks on but no torch fire if i stop the program by hitting any key then hit start it starts to cut not sure whats up wether we clicked some setting or if it may be the swirl rings or what any help wwould be great
steelcutter
1/2 Star Member
1/2 Star Member
Posts: 6
Joined: Tue Sep 04, 2012 6:01 pm

Re: torch not fireing every move

Post by steelcutter »

CHECK YOUR GROUND AND YOUR EARTH GROUND...
Post Reply

Return to “RazorWeld, Everlast, & All Other Plasma Cutters”