LDR Rotary Add on system

Don't see your table manufacturer listed above? Post here in this forum.
Post Reply
dhelfter
2.5 Star Member
2.5 Star Member
Posts: 125
Joined: Wed Sep 09, 2009 11:18 pm

LDR Rotary Add on system

Post by dhelfter »

Some pictures of our newest rotary add on system for our flat table. Some of the features/advantages:
Handles 1" to 10" diameter
Handles up to 300lb pipe/tube
Pipe/tube rests on roller trollies, allows pipe to be loaded then "rolled" in to chuck. Easy one man operation
Set up on long side of machine, so can handle pipe as lnog as your machine travel.
Separate structure, allows it to be stored elsewhere when not in use.Also allows it to be set up at front of machine.
Uses chuck for rotation. This allows positive grip with pipe, no chance of slip or walk like with band drive systems.
All this and needed software for $2000
Thanks
Dan
LDR Motion Systems

You currently do not have access to download this file.
To gain download access for DXF, SVG & other files Click Here

User avatar
tnbndr
4.5 Star Elite Contributing Member
4.5 Star Elite Contributing Member
Posts: 1668
Joined: Mon Jan 09, 2012 4:30 pm
Location: New Berlin, WI
Contact:

Re: LDR Rotary Add on system

Post by tnbndr »

Looks good. Are you going to have some type of retracting caster system on it for mobility?
Can it be retrofitted to older tables?
Dennis
LDR 4x8, Scribe, DTHCIV
Hypertherm PM45, Macair Dryer
DeVilbiss Air America 6.5HP, 80Gal., 175psi, Two Stage
16.9scfm@100psi, 16.0scfm@175psi
Miller 215 MultiMatic
RW 390E Slip Roll (Powered)
AutoCAD, SheetCAM, Mach 3
http://ikescreations.com
User avatar
_Ogre
3.5 Star Member
3.5 Star Member
Posts: 529
Joined: Sun Sep 15, 2013 4:26 pm
Location: Motown

Re: LDR Rotary Add on system

Post by _Ogre »

nice rotary setup
bulltear 4x8 cnc plasma table, candcnc bladerunner w/dthc, hypertherm powermax 65, sheetcam, mach3
laser cross hair for hypertherm torch http://www.plasmaspider.com/viewtopic.php?f=6&t=12508
an ogre smiley :mrgreen: how cool!
Post Reply

Return to “Various Manufacturers Forum”