It is currently Sun Jun 24, 2018 4:36 pm

 

LDR tables

LDR plasma table discussion forum
JerryC
Posts: 22
Joined: Thu Jul 16, 2009 12:23 am

LDR tables

Postby JerryC » Thu Mar 12, 2015 11:05 pm

Anyone have one of the LDR tables? Trying to get feedback from someone who has one. Looking to buy a 4X4 table for home and hobby use, but want a good quality one.

jbc28
Posts: 74
Joined: Sat Jul 19, 2014 10:24 pm

Re: LDR tables

Postby jbc28 » Fri Mar 13, 2015 7:56 am

I have a 5 x 10 with scribe. This is my first table. It has worked great even with a new user. I purchased in November. Dan was great to work with during the build, and he continues to provide great service and feedback. I picked it up in person in order to do some some training. I highly recommend doing that, if possible.
LDR 5x10
Hypertherm 85

User avatar
tnbndr
Elite Contributing Member
Elite Contributing Member
Posts: 1399
Joined: Mon Jan 09, 2012 4:30 pm
Location: New Berlin, WI
Contact:

Re: LDR tables

Postby tnbndr » Fri Mar 13, 2015 9:21 am

I have a 4x8 since July 2014 and am very happy with the table and my decision to purchase LDR. No mechanical problems that are LDR's fault and great support when needed.
Go to the Plasma Tables and cutters section of this forum and do a search for LDR and read.
Dennis
LDR 4x8, Scribe, DTHCIV
PM45
DeVilbiss Air America 6.5HP, 80Gal., 175psi, Two Stage
[email protected], [email protected]
Miller 211
RW 390E Slip Roll
AutoCAD, SheetCAM, Mach 3
https://www.facebook.com/ikescreations?ref=hl
http://ikescreations.com

JerryC
Posts: 22
Joined: Thu Jul 16, 2009 12:23 am

Re: LDR tables

Postby JerryC » Fri Mar 13, 2015 2:05 pm

Thanks guys, I haven't heard much about them. They look really well made and heavy duty compared to others in the same price range. It's good to know about the support.

aopenshaw
Posts: 15
Joined: Wed Dec 03, 2014 8:59 am
Location: Bessemer, AL

Re: LDR tables

Postby aopenshaw » Tue May 19, 2015 7:58 pm

I got a 4x4 LDR table in November and it is a well built machine. I have had very few problems and the minor issues I have had were mostly some cut quality issues that were more settings or bad consumables than anything else. Every time I needed help Dan answered me right away and talked me through it.
LDR Motion Systems 4x4
Hypertherm Powermax 65


Return to “LDR Motion Systems”

Who is online

Users browsing this forum: No registered users and 1 guest

Easyscriber engrave attachment for Hypertherm torch's