Plasma table build

Share and learn with other DIY members who have built their own plasma tables and accessories.
Post Reply
philfan
1/2 Star Member
1/2 Star Member
Posts: 4
Joined: Tue Jan 30, 2018 6:52 pm

Plasma table build

Post by philfan »

The water table takes an 8 x 4 sheet with a little spare. There,s room for a rotary axis off to the side also.The software is uccnc. just waiting for the tecarc 65 plasma to arrive.
https://photos.app.goo.gl/TaXxAeAZhZ2pPUYr7
Post Reply

Return to “DIY Plasma Table & Accessory Discussion Forum”