Another Small Plasma Table

Share and learn with other DIY members who have built their own plasma tables and accessories.
Post Reply
msimpson99
2.5 Star Member
2.5 Star Member
Posts: 210
Joined: Wed May 04, 2016 2:31 pm
Contact:

Another Small Plasma Table

Post by msimpson99 »

It's been a while since I posted here. Way back I posted about my small KRMx02 plasma conversion.
_MG_3472b.jpg
This machine has worked very well for making small parts, but I started a new bit of experiments called the CNC Construction Set. These were all about using common parts to build a couple different CNC machines.

My first is a plasma cutter. The first prototypes will have a 12" x 24" cutting envelope. The size will increase as new builds are added.

Here are my very first cuts on the CNC Construction Set plasma cutter. Please note, that I don't yer have a THC or even a initial height sensor attached to the machine.

https://youtu.be/c_0OFB3rn5w

You can see my writeup on the build here:
http://www.kronosrobotics.com/cnccsintro/

You currently do not have access to download this file.
To gain download access for DXF, SVG & other files Click Here

msimpson99
2.5 Star Member
2.5 Star Member
Posts: 210
Joined: Wed May 04, 2016 2:31 pm
Contact:

Re: Another Small Plasma Table

Post by msimpson99 »

I just added the new table to the build.
_MG_9570.jpg
This gives me full access to the full 13"x25" cutting area for this build.

You can see the writeup here:
http://www.kronosrobotics.com/cnccsplasma-table/

You currently do not have access to download this file.
To gain download access for DXF, SVG & other files Click Here

msimpson99
2.5 Star Member
2.5 Star Member
Posts: 210
Joined: Wed May 04, 2016 2:31 pm
Contact:

Re: Another Small Plasma Table

Post by msimpson99 »

I created this Bent Steel Project box to test my little plasma cutter build.
_MG_9706.jpg
I did a full writeup here:
http://www.kronosrobotics.com/bent-steel-project-box/

It is not a tutorial as this is my very first finger pressed project box and need a lot more seat time to get it perfect. It was a nice test for the machine however.

You currently do not have access to download this file.
To gain download access for DXF, SVG & other files Click Here

Post Reply

Return to “DIY Plasma Table & Accessory Discussion Forum”