It's been a while since I posted here. Way back I posted about my small KRMx02 plasma conversion.
My first is a plasma cutter. The first prototypes will have a 12" x 24" cutting envelope. The size will increase as new builds are added.
Here are my very first cuts on the CNC Construction Set plasma cutter. Please note, that I don't yer have a THC or even a initial height sensor attached to the machine.
https://youtu.be/c_0OFB3rn5w
You can see my writeup on the build here:
http://www.kronosrobotics.com/cnccsintro/
This machine has worked very well for making small parts, but I started a new bit of experiments called the CNC Construction Set. These were all about using common parts to build a couple different CNC machines.Another Small Plasma Table
-
- 2.5 Star Member
- Posts: 210
- Joined: Wed May 04, 2016 2:31 pm
- Contact:
Another Small Plasma Table
You currently do not have access to download this file.
To gain download access for DXF, SVG & other files Click Here
-
- 2.5 Star Member
- Posts: 210
- Joined: Wed May 04, 2016 2:31 pm
- Contact:
Re: Another Small Plasma Table
I just added the new table to the build.
This gives me full access to the full 13"x25" cutting area for this build.
You can see the writeup here:
http://www.kronosrobotics.com/cnccsplasma-table/
This gives me full access to the full 13"x25" cutting area for this build.
You can see the writeup here:
http://www.kronosrobotics.com/cnccsplasma-table/
You currently do not have access to download this file.
To gain download access for DXF, SVG & other files Click Here
-
- 2.5 Star Member
- Posts: 210
- Joined: Wed May 04, 2016 2:31 pm
- Contact:
Re: Another Small Plasma Table
I created this Bent Steel Project box to test my little plasma cutter build.
http://www.kronosrobotics.com/bent-steel-project-box/
It is not a tutorial as this is my very first finger pressed project box and need a lot more seat time to get it perfect. It was a nice test for the machine however.
I did a full writeup here:http://www.kronosrobotics.com/bent-steel-project-box/
It is not a tutorial as this is my very first finger pressed project box and need a lot more seat time to get it perfect. It was a nice test for the machine however.
You currently do not have access to download this file.
To gain download access for DXF, SVG & other files Click Here